Les catalogues doivent être lus en entier afin d'assurer une sélection adéquate des produits par le concepteur et l'utilisateur du système. Lors de la sélection des produits, l'intégralité de la conception du système doit être prise en considération pour garantir un fonctionnement fiable et sans incident. La responsabilité de l'utilisation, de la compatibilité des matériaux, du choix de capacités nominales appropriées, d'une installation, d'un fonctionnement et d'une maintenance corrects incombe au concepteur et à l'utilisateur du système.
경고: 스웨즈락의 튜브 피팅 연결구를 포함하여 이러한 제품은 산업 설계 기준에 따라 제조되지 않으므로 스웨즈락의 제품 및 부품을 타 제조업체의 제품 및 부품과 혼합하거나 혼용하여 사용하지 마십시오.
Vanne à membrane très haute pureté en acier inoxydable 316L VIM-VAR, raccord VCR mâle 1/4 po, nettoyage SC-01, actionneur NF
로그인 또는 회원가입하여 가격 보기
카탈로그
직선형 및 멀티포트
다양한 크기, 재질, 구성으로 다양한 애플리케이션에 이용 가능한 스웨즈락 다이어프램 밸브로 고순도 및 UHP 시스템의 요구를 충족시킬 수 있습니다.
Features: Suitable for ultrahigh-purity applications; 316L VIM-VAR stainless steel body; Low-pressure and high-pressure models; VCR®, tube butt weld, and modular surface-mount end connections; Manual or pneumatic actuation
Features: Step-by-step identification procedure for threads and end connections.
This document specifies guidelines used by Swagelok Company for producing stainless steel products intended for photovoltaic (PV) applications.
Components: 1.5 in. (38.1 mm) C-seal modular design; Valves: manual and pneumatic diaphragm and bellows-sealed designs; Regulators: manual and preset, high-flow models; Gaskets: C-seal style for 1-, 2-, and 3-port configurations
Scope: This document specificies guidelines used by Swagelok® Company for producing ultrahigh-purity (UHP) electropolished stainless steel products as well as ultrahigh-purity plastic products. This document must be used in conjunction with product catalogs, technical bulletins, and reports for complete product information.
Features: This technical report provides data on Swagelok® DP series diaphragm valves. The report covers: surface finish specifications; inboard helium leak testing; particle counting; moisture analysis; hydrocarbon analysis; ionic cleanliness.
Welding should be done by qualified personnel as outlined in Section IX of the ASME Boiler Code. Weld filler material should be the same as the base material.
사양
속성 | 값 |
---|---|
몸체 재질 | 316L VIM-VAR |
세정 공정 | 초고순도 공정 사양(SC-01) |
연결구 1 크기 | 1/4인치 |
연결구 1 종류 | 면 밀폐(메탈 가스켓) 수나사 VCR |
연결구 2 크기 | 1/4인치 |
연결구 2 종류 | 면 밀폐(메탈 가스켓) 수나사 VCR |
CV 최대 | 0.27 |
최대 온도, °F(°C) | 150 (65) |
최소 온도, °F(°C) | -10 (-23) |
eClass (4.1) | 37010206 |
eClass (5.1.4) | 37011800 |
eClass (6.0) | 37011801 |
eClass (6.1) | 37011801 |
UNSPSC (4.03) | 40141600 |
UNSPSC (10.0) | 40141621 |
UNSPSC (11.0501) | 40141621 |
UNSPSC (13.0601) | 40141621 |
UNSPSC (15.1) | 40141621 |
UNSPSC (17.1001) | 40141600 |
자원
비슷한 제품
부품 번호(Part #)
|
몸체 재질
|
연결구 1 크기
|
연결구 1 종류
|
연결구 2 크기
|
연결구 2 종류
|
|
---|---|---|---|---|---|---|
6LVV-DPA111P-C | 316L VIM-VAR | 1/4인치 | 튜브 맞대기 용접 | 1/4인치 | 튜브 맞대기 용접 | 제품 보기 |
6LVV-DPBW4-P1-C | 316L VIM-VAR | 1/4 pulg. | Soldadura de tubo a tope | 1/4 pulg. | Soldadura de tubo a tope | 제품 보기 |
6LVV-DPBW4-P-C | 316L VIM-VAR | 1/4 pulg. | Soldadura de tubo a tope | 1/4 pulg. | Soldadura de tubo a tope | 제품 보기 |
6LVV-DPC111P-C | 316L VIM-VAR | 1/4 pulg. | Soldadura de tubo a tope | 1/4 pulg. | Soldadura de tubo a tope | 제품 보기 |
6LVV-DPFR4-P1-C | 316L VIM-VAR | 1/4 pulg. | Cierre Frontal (Junta Plana) VCR hembra | 1/4 pulg. | Cierre Frontal (Junta Plana) VCR hembra | 제품 보기 |
6LVV-DPFR4-P-C | 316L VIM-VAR | 1/4 pulg. | Cierre Frontal (Junta Plana) VCR hembra | 1/4 pulg. | Cierre Frontal (Junta Plana) VCR hembra | 제품 보기 |
6LVV-DPFR4-P-CM | Acier inoxydable 316L VIM-VAR | 1/4 po | VCR femelle (joint métallique) | 1/4 po | VCR femelle (joint métallique) | 제품 보기 |
6LVV-DPFR4-P-O | Acier inoxydable 316L VIM-VAR | 1/4 po | VCR femelle (joint métallique) | 1/4 po | VCR femelle (joint métallique) | 제품 보기 |
6LVV-DPHVR4-P-C | Acier inoxydable 316L VIM-VAR | 1/4 po | Raccord à étanchéité de surface (joint métallique) VCR mâle | 1/4 po | Raccord à étanchéité de surface (joint métallique) VCR mâle | 제품 보기 |
6LVV-DPL11P-C | Acier inoxydable 316L VIM-VAR | 1/4 po | Tube à souder bout à bout | 1/4 po | Tube à souder bout à bout | 제품 보기 |
6LVV-DPMR4-P-C | Acier inoxydable 316L VIM-VAR | 1/4 po | Raccords VCR tournant mâle (joint métallique) | 1/4 po | Raccords VCR tournant mâle (joint métallique) | 제품 보기 |
6LVV-DPR11P-C | Acier inoxydable 316L VIM-VAR | 1/4 po | Tube à souder bout à bout | 1/4 po | Tube à souder bout à bout | 제품 보기 |
6LVV-DPS4-C | Acier inoxydable 316L VIM-VAR | 1/4 po | Raccord Swagelok® pour tubes | 1/4 po | Raccord Swagelok® pour tubes | 제품 보기 |
6LVV-DPS4-O | Acier inoxydable 316L VIM-VAR | 1/4 po | Raccord Swagelok® pour tubes | 1/4 po | Raccord Swagelok® pour tubes | 제품 보기 |
6LVV-DPS6M-C | Acier inoxydable 316L VIM-VAR | 6 mm | Raccord Swagelok® pour tubes | 6 mm | Raccord Swagelok® pour tubes | 제품 보기 |
6LVV-DPTVR4-P | Acier inoxydable 316L VIM-VAR | 1/4 po | Raccord VCR mâle (joint métallique) | 1/4 po | Raccord VCR mâle (joint métallique) | 제품 보기 |
6LVV-DPVFR4-P-C | Acier inoxydable 316L VIM-VAR | 1/4 po | Raccord VCR femelle (joint métallique) | 1/4 po | Raccord VCR femelle (joint métallique) | 제품 보기 |
6LVV-DPVR4-P1-C | Acier inoxydable 316L VIM-VAR | 1/4 po | Raccord à étanchéité de surface (joint métallique) VCR mâle | 1/4 po | Raccord à étanchéité de surface (joint métallique) VCR mâle | 제품 보기 |
6LVV-DPVR4-P-O | Acier inoxydable 316L VIM-VAR | 1/4 po | Raccord à étanchéité de surface (joint métallique) VCR mâle | 1/4 po | Raccord à étanchéité de surface (joint métallique) VCR mâle | 제품 보기 |
Contact
Si vous avez des questions concernant ce produit, prenez contact avec votre distributeur agréé. Celui-ci pourra également vous renseigner sur des services qui vous permettront de tirer le meilleur parti de votre investissement.