스테인리스강 원피스(1-Piece) 40G 시리즈 볼 밸브, 1.4 Cv, 6 mm 스웨즈락 튜브 피팅, SC-11 세정

개폐형, 방향전환형 및 교차형 유로; 최대 사용 압력 3000 psig (206 bar); 온도 범위 –53 ~ 148°C (–65 ~ 300°F); 실외 환경 및 고온 공정용 사양; 1/16 ~ 3/4 in. 및 3 ~ 12 mm 연결구

Kugelhähne der Ser ien 40G, 40, 60, 83, H83 und SK AFS-Kugelhähne, Betätigungsdrehmoment des Hahns berechnen, Steuerköpfe und verwandte Komponenten auswählen, Montagebügelsätze auswählen

Features: Limits access to manually actuated valves;Lockout accessory enables compliance with OSHA Lockout/Tagout, Standard 29 CFR Part 1910.147, Control of Hazardous Energy Bright safety orange color promotes high visibility. Other colors are available.

Serie MPC: ANSI/ISA 76.00.02-konformes Design, 38,2 mm (1,5 Zoll Plattform); einfache Konfiguration, Montage und Wartung; Ventile, Filter, Druckregler und Manometer sowie Adapter für weitere Aufbaukomponenten

Features: Rack and pinion pneumatic actuators, solenoid valves, and limit switches; ISO 5211-compliant pneumatic actuators, solenoid valves, limit switches, and position sensors; Complete actuated assemblies and kits for field assembly available

Pages 1-3. Features: installation in high-pressure applications and high safety-factor systems.

Features: Locking Bracket Kit.

40 series ball valve (standard) packing adjustment instructions, multilingual

Montageanleitung ISO 5211 konforme Halterung, Kupplung und Steuerkopf

an elektrische Steuerköpfe der Serie 140 , pneumatische Steuerköpfe der Serie 130 /150, pneumatische Steuerköpfe der Serie 121

Note orientation of the directional handle. Bar handle must be installed pointing in the same direction as the removed handle; Loosen set screw; Remove current handle. Also remove the handle stop insert when applicable.

If the valve handle is removed, please note its orientation; When reinstalled, the handle must be in the same orientation.

This document contains instructions for replacing a standard valve handle with a latch/lock handle on the following 3-way ball valves: