The complete catalog contents must be reviewed to ensure that the system designer and user make a safe product selection. When selecting products, the total system design must be considered to ensure safe, trouble-free performance. Function, material compatibility, adequate ratings, proper installation, operation, and maintenance are the responsibilities of the system designer and user.
警告: Les composants qui ne sont pas régis par une norme, comme les raccords pour tubes Swagelok, ne doivent jamais être mélangés/intervertis avec ceux d’autres fabricants.
316L VIM-VAR UHP Diaphragm Sealed Valve, 1/4 in. Rotatable Male VCR Fitting, SC-01 Cleaned, Blue Directional Handle
ログインまたは登録して価格を見る
カタログ
Configuration droite, actionnement manuel
Répondez aux exigences de haute ou très haute pureté avec les vannes à membrane Swagelok, proposées avec un large choix de dimensions, de matériaux et de configurations, pour les applications les plus diverses.
DP 시리즈 초고순도 사양에 적합 316L VIM-VAR 스텐레스강 몸체 저압용 및 고압용 모델 VCR®, 튜브 맞대기 용점 및 블럭 조립식 연결구 수동식 또는 공기작동식 개폐기
Features: Step-by-step identification procedure for threads and end connections.
This document specifies guidelines used by Swagelok Company for producing stainless steel products intended for photovoltaic (PV) applications.
Components: 1.5 in. (38.1 mm) C-seal modular design; Valves: manual and pneumatic diaphragm and bellows-sealed designs; Regulators: manual and preset, high-flow models; Gaskets: C-seal style for 1-, 2-, and 3-port configurations
범위 이 문서에서는 Swagelok이 초고순도(UHP) 전해연마된 스텐레스강 제품과 초고순도 플라스틱 제품을 생산할 때에 준수하는 가이드라인을 설명합니다. 완전한 제품 정보를 얻기 위해서는 이 문서와 함께 제품 카탈로그, 기술 자료 및 보고서도 이용해야 합니다.
Features: This technical report provides data on Swagelok® DP series diaphragm valves. The report covers: surface finish specifications; inboard helium leak testing; particle counting; moisture analysis; hydrocarbon analysis; ionic cleanliness.
Welding should be done by qualified personnel as outlined in Section IX of the ASME Boiler Code. Weld filler material should be the same as the base material.
仕様
属性 | 値 |
---|---|
アクチュエーター・タイプ | Manuel |
ボディ材質 | Acier inoxydable 316L VIM-VAR |
洗浄プロセス | Spécifications très haute pureté (SC-01) |
コネクション1 サイズ | 1/4 po |
コネクション1 タイプ | Raccord VCR mâle tournant |
コネクション2 サイズ | 1/4 po |
コネクション2 タイプ | Raccords VCR tournant mâle (joint métallique) |
最大Cv | 0.27 |
フロー・パターン | Droite (2 voies) |
ハンドル・カラー | Bleu |
ハンドル・タイプ | Poignée directionnelle |
最高温度、°F (°C) | 150 (65) |
最高使用温度における最高使用圧力 | 150°F À 250 PSIG / 65°C À 17,2 BAR |
最低温度、 °F (°C) | -10 (-23) |
室温における最高使用圧力 | 250 PSIG À 70°F / 17,2 BAR À 20°C |
シート材質 | PCTFE |
表面仕上げ | Ra de 0,13 µm (5 µpo) |
eClass (4.1) | 37010206 |
eClass (5.1.4) | 37011800 |
eClass (6.0) | 37011801 |
eClass (6.1) | 37011801 |
UNSPSC (4.03) | 40141600 |
UNSPSC (10.0) | 40141621 |
UNSPSC (11.0501) | 40141621 |
UNSPSC (13.0601) | 40141621 |
UNSPSC (15.1) | 40141621 |
UNSPSC (17.1001) | 40141621 |
資料
類似製品
型番
|
ボディ材質
|
コネクション1 サイズ
|
コネクション1 タイプ
|
コネクション2 サイズ
|
コネクション2 タイプ
|
|
---|---|---|---|---|---|---|
6LVV-DPBW4-P | 316L VIM-VAR | 1/4인치 | 튜브 맞대기 용접 | 1/4인치 | 튜브 맞대기 용접 | 製品を見る |
6LVV-DPC233P-C | 316L VIM-VAR | 1/4인치 | 회전 수나사 VCR® 메탈 가스켓 면 밀폐 피팅 | 1/4인치 | 암나사 VCR® 메탈 가스켓 면 밀폐 | 製品を見る |
6LVV-DPFR4-P | 316L VIM-VAR | 1/4인치 | 면 밀폐(메탈 가스켓) 암나사 VCR | 1/4인치 | 면 밀폐(메탈 가스켓) 암나사 VCR | 製品を見る |
6LVV-DPFR4-P1 | 316L VIM-VAR | 1/4인치 | 면 밀폐(메탈 가스켓) 암나사 VCR | 1/4인치 | 면 밀폐(메탈 가스켓) 암나사 VCR | 製品を見る |
6LVV-DPFR4-P-GR | 316L VIM-VAR | 1/4인치 | 면 밀폐(메탈 가스켓) 암나사 VCR | 1/4인치 | 면 밀폐(메탈 가스켓) 암나사 VCR | 製品を見る |
6LVV-DPLFR4-P | 316L VIM-VAR | 1/4인치 | 면 밀폐(메탈 가스켓) 암나사 VCR | 1/4인치 | 면 밀폐(메탈 가스켓) 암나사 VCR | 製品を見る |
6LVV-DPLVR4-P | 316L VIM-VAR | 1/4인치 | 면 밀폐(메탈 가스켓) 수나사 VCR | 1/4인치 | 면 밀폐(메탈 가스켓) 수나사 VCR | 製品を見る |
6LVV-DPS4 | 316L VIM-VAR | 1/4인치 | Swagelok® 튜브 피팅 | 1/4인치 | Swagelok® 튜브 피팅 | 製品を見る |
6LVV-DPS6M | 316L VIM-VAR | 6mm | Swagelok® 튜브 피팅 | 6mm | Swagelok® 튜브 피팅 | 製品を見る |
6LVV-DPTFR4-P | 316L VIM-VAR | 1/4인치 | 면 밀폐(메탈 가스켓) 암나사 VCR | 1/4인치 | 면 밀폐(메탈 가스켓) 암나사 VCR | 製品を見る |
6LVV-DPVR4-P | 316L VIM-VAR | 1/4인치 | 면 밀폐(메탈 가스켓) 수나사 VCR | 1/4인치 | 면 밀폐(메탈 가스켓) 수나사 VCR | 製品を見る |
6LVV-DPVR4-P1 | 316L VIM-VAR | 1/4인치 | 면 밀폐(메탈 가스켓) 수나사 VCR | 1/4인치 | 면 밀폐(메탈 가스켓) 수나사 VCR | 製品を見る |
お問い合わせ
本製品に関するご質問は、担当のスウェージロック指定販売会社までお問い合わせください。指定販売会社は、投資を最大限に活用するためのアドバイスも提供いたします。