Les catalogues doivent être lus en entier afin d'assurer une sélection adéquate des produits par le concepteur et l'utilisateur du système. Lors de la sélection des produits, l'intégralité de la conception du système doit être prise en considération pour garantir un fonctionnement fiable et sans incident. La responsabilité de l'utilisation, de la compatibilité des matériaux, du choix de capacités nominales appropriées, d'une installation, d'un fonctionnement et d'une maintenance corrects incombe au concepteur et à l'utilisateur du système.
警告: Swagelok 튜브 피팅 연결구를 포함하여 Swagelok의 제품 및 부품을 산업 설계 표준이 적용되지 않는 타사 제품 및 부품과 혼합하거나 혼용하여 사용하지 마십시오.
カタログ
전위 페럴
견고한 튜브 조임(Grip)과 진동 저항성으로 누설에 강합니다. 스웨즈락 튜브 피팅의 놀라운 신뢰성은 65년 간의 성공으로 증명됐으며, 극단적인 환경에서 실시된 것을 포함해 수많은 테스트 보고서가 문서로 기록되고 있습니다.
Disponibles pour tubes de 2 à 50 mm et de 1/16 à 2 po; Systématiquement contrôlable lors du montage initial; Facile à desserrer et à resserrer; Large gamme de matériaux et de configurations
Sélection des tubes ; Manipulation des tubes ; Applications gaz; Installation des tubes; Tableaux des pressions de service admissibles recommandées
Liquides détecteurs de fuites Snoop®; Lubrifiants pour filetages Goop™ ; Produits d’étanchéité pour filetages : SWAK®, ruban PTFE, sans PTFE
Swagelok® Specification SC-10 defines the cleaning, lubrication, assembly, and packaging requirements for standard Swagelok products and describes practices used to meet these requirements.
This document specifies guidelines used by Swagelok® Company and its suppliers to ensure compliance with product cleanliness requirements as stated in ASTM G93 Level C. Application of the document is limited to wetted system components. This document must be used in conjunction with product catalogs, technical bulletins, and reports.
Caractéristiques : Procédure d’identification étape par étape des filetages et raccords.
仕様
属性 | 値 |
---|---|
ボディ材質 | 나일론 |
洗浄プロセス | 표준 세정 및 포장(SC-10) |
コネクション1 サイズ | 3/4인치 |
流量制限 | いいえ |
eClass (4.1) | 37020718 |
eClass (5.1.4) | 37020590 |
eClass (6.0) | 21022110 |
eClass (6.1) | 37020590 |
UNSPSC (4.03) | 27121703 |
UNSPSC (10.0) | 31181503 |
UNSPSC (11.0501) | 31181503 |
UNSPSC (13.0601) | 31401700 |
UNSPSC (15.1) | 31401700 |
UNSPSC (17.1001) | 27120000 |
資料
類似製品
型番
|
ボディ材質
|
コネクション1 サイズ
|
コネクション1 タイプ
|
コネクション2 サイズ
|
コネクション2 タイプ
|
|
---|---|---|---|---|---|---|
2507-1213-1 | Acier inoxydable super duplex | 3/4 po | - | - | - | 製品を見る |
2507-403-1 | Acier inoxydable super duplex | 1/4 po | - | - | - | 製品を見る |
2507-603-1 | Acier inoxydable super duplex | 3/8 po | - | - | - | 製品を見る |
2507-813-1 | Acier inoxydable super duplex | 1/2 po | - | - | - | 製品を見る |
6MO-813-1 | 6-moly | 1/2 po | - | - | - | 製品を見る |
825-403-1 | Alliage 825 | 1/4 po | - | - | - | 製品を見る |
B-203-1 | Laiton | 1/8 po | - | - | - | 製品を見る |
B-403-1 | Laiton | 1/4 po | - | - | - | 製品を見る |
B-603-1 | Laiton | 3/8 po | - | - | - | 製品を見る |
HC-203-1 | Alliage C-276 | 1/8 po | - | - | - | 製品を見る |
HC-403-1 | Alliage C-276 | 1/4 po | - | - | - | 製品を見る |
HC-603-1 | Alliage C-276 | 3/8 po | - | - | - | 製品を見る |
HC-813-1 | Alliage C-276 | 1/2 po | - | - | - | 製品を見る |
INC-403-1 | Alliage 600 | 1/4 po | - | - | - | 製品を見る |
M-603-1 | Alloy 400/R-405 | 3/8 po | - | - | - | 製品を見る |
M-813-1 | Alloy 400/R-405 | 1/2 po | - | - | - | 製品を見る |
NY-1613-1 | Nylon | 1 po | - | - | - | 製品を見る |
NY-403-1 | Nylon | 1/4 po | - | - | - | 製品を見る |
NY-603-1 | Nylon | 3/8 po | - | - | - | 製品を見る |
NY-813-1 | Nylon | 1/2 po | - | - | - | 製品を見る |
PFA-423-1 | PFA | 1/4 po | - | - | - | 製品を見る |
PFA-823-1 | PFA | 1/2 po | - | - | - | 製品を見る |
S-1213-1 | Acier au carbone | 3/4 po | - | - | - | 製品を見る |
S-1613-1 | Acier au carbone | 1 po | - | - | - | 製品を見る |
SS-1013-1 | Acier inoxydable 316 | 5/8 po | - | - | - | 製品を見る |
SS-103-1 | Acier inoxydable 316 | 1/16 po | - | - | - | 製品を見る |
SS-103-1-B1000 | Acier inoxydable 316 | 1/16 po | - | - | - | 製品を見る |
SS-10M3-1 | Acier inoxydable 316 | 10 mm | - | - | - | 製品を見る |
SS-1213-1 | Acier inoxydable 316 | 3/4 po | - | - | - | 製品を見る |
SS-12M3-1 | Acier inoxydable 316 | 12 mm | - | - | - | 製品を見る |
SS-1413-1 | Acier inoxydable 316 | 7/8 po | - | - | - | 製品を見る |
SS-14M3-1 | Acier inoxydable 316 | 14 mm | - | - | - | 製品を見る |
SS-15M3-1 | Acier inoxydable 316 | 15 mm | - | - | - | 製品を見る |
SS-1613-1 | Acier inoxydable 316 | 1 po | - | - | - | 製品を見る |
SS-16M3-1 | Acier inoxydable 316 | 16 mm | - | - | - | 製品を見る |
SS-18M3-1 | Acier inoxydable 316 | 18 mm | - | - | - | 製品を見る |
SS-2003-1 | Acier inoxydable 316 | 1 1/4 po | - | - | - | 製品を見る |
SS-203-1 | Acier inoxydable 316 | 1/8 po | - | - | - | 製品を見る |
SS-20M3-1 | Acier inoxydable 316 | 20 mm | - | - | - | 製品を見る |
SS-22M3-1 | Acier inoxydable 316 | 22 mm | - | - | - | 製品を見る |
SS-2403-1 | Acier inoxydable 316 | 1 1/2 po | - | - | - | 製品を見る |
SS-25M3-1 | Acier inoxydable 316 | 25 mm | - | - | - | 製品を見る |
SS-28M3-1 | Acier inoxydable 316 | 28 mm | - | - | - | 製品を見る |
SS-2M3-1 | Acier inoxydable 316 | 2 mm | - | - | - | 製品を見る |
SS-303-1 | Acier inoxydable 316 | 3/16 po | - | - | - | 製品を見る |
SS-3203-1 | Acier inoxydable 316 | 2 po | - | - | - | 製品を見る |
SS-3M3-1 | 316 스테인리스강 | 3mm | - | - | - | 製品を見る |
SS-403-1 | 316 스테인리스강 | 1/4인치 | - | - | - | 製品を見る |
SS-4M3-1 | 316 스테인리스강 | 4mm | - | - | - | 製品を見る |
SS-503-1 | 316 스테인리스강 | 5/16인치 | - | - | - | 製品を見る |
SS-603-1 | 316 스테인리스강 | 3/8인치 | - | - | - | 製品を見る |
SS-6M3-1 | 316 스테인리스강 | 6mm | - | - | - | 製品を見る |
SS-813-1 | 316 스테인리스강 | 1/2인치 | - | - | - | 製品を見る |
SS-8M3-1 | 316 스테인리스강 | 8mm | - | - | - | 製品を見る |
T-1213-1 | PTFE | 3/4인치 | - | - | - | 製品を見る |
T-12M3-1 | PTFE | 12mm | - | - | - | 製品を見る |
T-1613-1 | PTFE | 1인치 | - | - | - | 製品を見る |
T-203-1 | PTFE | 1/8인치 | - | - | - | 製品を見る |
T-303-1 | PTFE | 3/16인치 | - | - | - | 製品を見る |
T-3M3-1 | PTFE | 3mm | - | - | - | 製品を見る |
T-403-1 | PTFE | 1/4인치 | - | - | - | 製品を見る |
T-503-1 | PTFE | 5/16인치 | - | - | - | 製品を見る |
T-6M3-1 | PTFE | 6mm | - | - | - | 製品を見る |
T-813-1 | PTFE | 1/2인치 | - | - | - | 製品を見る |
T-8M3-1 | PTFE | 8mm | - | - | - | 製品を見る |
연락처
이 제품에 대해 질문이 있으시면, 현지 공식 판매 및 서비스 센터로 연락하시기 바랍니다. 또한 귀하의 투자가 최상의 것을 이끌어낼 수 있도록 도와 드릴 수 있는 지원 서비스에 대해 귀하에게 설명드립니다.