Manguito de refuerzo interior de Acero inox., 3/4 pulg. OD x 5/8 pulg. ID
Réf. pièce : SS-1215-10
|
||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Spécifications
튜빙 인서트견고한 튜브 조임(Grip)과 진동 저항성으로 누설에 강합니다. 스웨즈락 튜브 피팅의 놀라운 신뢰성은 65년 간의 성공으로 증명됐으며, 극단적인 환경에서 실시된 것을 포함해 수많은 테스트 보고서가 문서로 기록되고 있습니다. Ouvrir une session ou s’inscrire pour afficher des prix ContactSi vous avez des questions concernant ce produit, prenez contact avec votre distributeur agréé. Celui-ci pourra également vous renseigner sur des services qui vous permettront de tirer le meilleur parti de votre investissement.
Sélection des produits en toute sécurité :
Les catalogues doivent être lus en entier afin d'assurer une sélection adéquate des produits par le concepteur et l'utilisateur du système. Lors de la sélection des produits, l'intégralité de la conception du système doit être prise en considération pour garantir un fonctionnement fiable et sans incident. La responsabilité de l'utilisation, de la compatibilité des matériaux, du choix de capacités nominales appropriées, d'une installation, d'un fonctionnement et d'une maintenance corrects incombe au concepteur et à l'utilisateur du système. |
Les catalogues doivent être lus en entier afin d'assurer une sélection adéquate des produits par le concepteur et l'utilisateur du système. Lors de la sélection des produits, l'intégralité de la conception du système doit être prise en considération pour garantir un fonctionnement fiable et sans incident. La responsabilité de l'utilisation, de la compatibilité des matériaux, du choix de capacités nominales appropriées, d'une installation, d'un fonctionnement et d'une maintenance corrects incombe au concepteur et à l'utilisateur du système.
Manguito de refuerzo interior de Acero inox., 3/4 pulg. OD x 5/8 pulg. ID
Ouvrir une session ou s’inscrire pour afficher des prix
Catalogues
튜빙 인서트
Erhältlich in Rohrgrößen von 2 bis 50 mm und 1/16 bis 2 Zoll; Gleichbleibende Prüflehrenfähigkeit nach Erstmontage; Einfache Wiedermontage; Große Auswahl an Werkstoffen und Ausführungen
Produkte: Snoop® Lecksuchflüssigkeiten; Goop™ Gewindeschmiermittel ; SWAK®, PTFE-Gewindedichtband und PTFE-freie Gewindedichtmittel
Merkmale: Systematisches Verfahren zur Identifikation von Gewinden und Endanschlüssen.
Rohrauswahl; Handhabung der Rohre; Gasanwendung; Rohrmontage; Tabellen mit zulässigem Betriebsdruck; Rohre aus Kohlenstoffstahl; Edelstahlrohre; Kupferrohre; Aluminiumrohre; Rohre aus Alloy 400; Rohre aus Alloy C-276; Rohre aus Alloy 20; Rohre aus Alloy 600; Rohre aus Titan der Klasse 2
Dieses Dokuments enthält die von Swagelok® Company und seinen Zulieferern verwendeten Richtlinien zum Einhaltung der Produktreinheitsanforderungen nach ASTM G93 Stufe C.Die Anwendung des Dokuments ist auf medienberührte Systemkomponenten begrenzt.Dieses Dokument muss zusammen mit Produktkatalogen, technischen Merkblättern und Berichten verwendet werden.
Die Swagelok® Spezifikation SC-10 definiert die Anforderungen für Reinigung, Schmierung, Montage und Verpackung für standardmäßige Swagelok Produkte und beschreibt die Verfahren, die zum Erfüllen dieser Anforderungen verwendet werden.SC-10 gilt für grundlegende Industrieverfahren. Der Systemdesigner und Anwender sollten diese Spezifikation verwenden und bestimmen, ob sie die Reinigungsanforderungen des Anwenders erfüllt.
Spécifications
SS-1215-10 — Manguito de refuerzo interior de Acero inox., 3/4 pulg. OD x 5/8 pulg. ID
Attribut | Valeur |
---|---|
몸체 재질 | 스테인리스강 |
세정 공정 | 표준 세정 및 포장(SC-10) |
연결구 1 크기 | 3/4인치 |
연결구 2 크기 | 5/8인치 ID |
연결구 2 종류 | 플라스틱 튜빙 인서트 |
유량 제한기 | 아니오 |
eClass (4.1) | 37020708 |
eClass (5.1.4) | 37020590 |
eClass (6.0) | 37020500 |
eClass (6.1) | 37020590 |
eClass (10.1) | 37020590 |
UNSPSC (4.03) | 40141720 |
UNSPSC (10.0) | 40142600 |
UNSPSC (11.0501) | 40142304 |
UNSPSC (13.0601) | 40183100 |
UNSPSC (15.1) | 40183100 |
UNSPSC (17.1001) | 40141622 |
Ressources
Produits similaires
Réf. pièce
|
Matériau du corps
|
Dimension du raccordement 1
|
Type du raccordement 1
|
Dimension du raccordement 2
|
Type du raccordement 2
|
|
---|---|---|---|---|---|---|
B-405-170 | Messing | 1/4 Zoll | - | 0,17 Zoll ID | Plastik Stützhülse | Afficher le produit |
B-405-2 | Messing | 1/4 Zoll | - | 1/8 Zoll ID | Plastik Stützhülse | Afficher le produit |
B-605-4 | Messing | 3/8 Zoll | - | 1/4 Zoll ID | Plastik Stützhülse | Afficher le produit |
B-6M5-4M | Messing | 6 mm | - | 4 mm ID | Plastik Stützhülse | Afficher le produit |
B-815-6 | Messing | 1/2 Zoll | - | 3/8 Zoll ID | Plastik Stützhülse | Afficher le produit |
SS-1015-8 | Edelstahl | 5/8 Zoll | - | 1/2 Zoll ID | Plastik Stützhülse | Afficher le produit |
SS-10M5-8M | Edelstahl | 10 mm | - | 8 mm ID | Plastik Stützhülse | Afficher le produit |
SS-1215-8 | Edelstahl | 3/4 Zoll | - | 1/2 Zoll ID | Plastik Stützhülse | Afficher le produit |
SS-12M5-10M | Edelstahl | 12 mm | - | 10 mm ID | Plastik Stützhülse | Afficher le produit |
SS-12M5-8M | Edelstahl | 12 mm | - | 8 mm ID | Plastik Stützhülse | Afficher le produit |
SS-1615-12 | Edelstahl | 1 Zoll | - | 3/4 Zoll ID | Plastik Stützhülse | Afficher le produit |
SS-1615-14 | Edelstahl | 1 Zoll | - | 7/8 Zoll ID | Plastik Stützhülse | Afficher le produit |
SS-305-2 | Edelstahl | 3/16 Zoll | - | 1/8 Zoll ID | Plastik Stützhülse | Afficher le produit |
SS-405-170 | Edelstahl | 1/4 Zoll | - | 0,17 Zoll ID | Plastik Stützhülse | Afficher le produit |
SS-405-2 | Edelstahl | 1/4 Zoll | - | 1/8 Zoll ID | Plastik Stützhülse | Afficher le produit |
SS-405-3 | Edelstahl | 1/4 Zoll | - | 3/16 Zoll ID | Plastik Stützhülse | Afficher le produit |
SS-505-3 | Edelstahl | 5/16 Zoll | - | 3/16 Zoll ID | Plastik Stützhülse | Afficher le produit |
SS-505-4 | Edelstahl | 5/16 Zoll | - | 1/4 Zoll ID | Plastik Stützhülse | Afficher le produit |
SS-605-277 | Edelstahl | 3/8 Zoll | - | 0,277 Zoll ID | Plastik Stützhülse | Afficher le produit |
SS-605-3 | Edelstahl | 3/8 Zoll | - | 3/16 Zoll ID | Plastik Stützhülse | Afficher le produit |
SS-605-4 | Edelstahl | 3/8 Zoll | - | 1/4 Zoll ID | Plastik Stützhülse | Afficher le produit |
SS-6M5-4M | Edelstahl | 6 mm | - | 4 mm ID | Plastik Stützhülse | Afficher le produit |
SS-815-4 | Edelstahl | 1/2 Zoll | - | 1/4 Zoll ID | Plastik Stützhülse | Afficher le produit |
SS-815-6 | Edelstahl | 1/2 Zoll | - | 3/8 Zoll ID | Plastik Stützhülse | Afficher le produit |
SS-8M5-6M | Edelstahl | 8 mm | - | 6 mm ID | Stützhülse | Afficher le produit |
Contact
If you have questions about this product, please contact your local authorized sales and service center. They can also tell you about supporting services to help you get the most out of your investment.