El diseñador y usuario del sistema deben revisar la documentación técnica para asegurar una correcta selección de producto. Al seleccionar un producto, habrá que tener en cuenta el diseño global del sistema para conseguir un servicio seguro y sin problemas. El diseñador de la instalación y el usuario son los responsables de la función del componente, de la compatibilidad de los materiales, de los rangos de operación apropiados, así como de la operación y mantenimiento del mismo.
警告: スウェージロック製品、または工業設計規格に準拠していない部品(Swagelokチューブ継手エンド・コネクションを含む)は、他社製品との混用や互換は絶対に行わないでください。
カタログ
ストレート型、手動式アクチュエーター
パックレス設計および溶接式シールを搭載したSwagelokベローズ・バルブを使えば、システム流体に触れないようにし、高い信頼性とリーク・タイト性能を実現することができます。 ベローズ・バルブは、外部への漏れ防止が重要になる用途に最適です。当社は、一般用/高純度用にさまざまなオプションをご用意しております。
Compactes; Pressions de service jusqu’à 68,9 bar (1000 psig); Températures jusqu’à 315˚C (600˚F).
Caractéristiques : Procédure d’identification étape par étape des filetages et raccords.
This document specifies guidelines used by Swagelok Company for producing stainless steel products intended for photovoltaic (PV) applications.
This document specifies guidelines used by Swagelok® Company and its suppliers to ensure compliance with product cleanliness requirements as stated in ASTM G93 Level C. Application of the document is limited to wetted system components. This document must be used in conjunction with product catalogs, technical bulletins, and reports.
Features: Limits access to manually actuated valves;Lockout accessory enables compliance with OSHA Lockout/Tagout, Standard 29 CFR Part 1910.147, Control of Hazardous Energy Bright safety orange color promotes high visibility. Other colors are available.
Bellows Kits, Stem Tip/Adapter Kits, bellows/Stem/Stem Tip/Adapter Kits, Gasket Kits for Swagelok® bellows-sealed valves
Swagelok® Specification SC-10 defines the cleaning, lubrication, assembly, and packaging requirements for standard Swagelok products and describes practices used to meet these requirements.
Valve sizing often is described by the nominal size of the end connections, but a more important measure is the flow that the valve can provide. And determining flow through a valve can be simple.
Pages 1-3. Features: installation in high-pressure applications and high safety-factor systems.
Le soudage doit être effectué par du personnel qualifié, comme spécifié à la Section IX du code des chaudières de l’ASME.
Procedure for installing Swagelok tube fittings in sizes over 1 inch or 25 mm.
仕様
属性 | 値 |
---|---|
アクチュエーター・タイプ | 手動式 |
ベローズ材質 | 321 ステンレス鋼 |
ボディ材質 | 316 ステンレス鋼 |
ボディ・シール | 溶接 |
洗浄プロセス | 標準のクリーニングおよびパッケージング(Swagelok SC-10仕様) |
コネクション1 サイズ | 1/4 インチ |
コネクション1 タイプ | Swagelok®チューブ継手 |
コネクション2 サイズ | 1/4 インチ |
コネクション2 タイプ | Swagelok®チューブ継手 |
最大Cv | 0.28 |
フロー・パターン | ストレート型(2方タイプ) |
ガスケット | なし |
ハンドル・カラー | グリーン |
ハンドル・タイプ | アルミニウム製ノブ・ハンドル |
最高温度、°F (°C) | 600 (315) |
最高使用温度における最高使用圧力 | 600°F @ 1000 PSIG /315°C @ 68.9 BAR |
最低温度、 °F (°C) | -80 (-62) |
室温における最高使用圧力 | 1000 PSIG @ 100°F/68.9 BAR @ 37℃ |
サービス・クラス | 一般用 |
ステム・チップ材質 | S17400ステンレス鋼 |
ステム・タイプ | コーン型ステム・チップ |
表面仕上げ | 標準 |
試験 | SCS-00020 に基づいたヘリウム・リーク・テスト |
eClass (4.1) | 37010201 |
eClass (5.1.4) | 37010201 |
eClass (6.0) | 37010201 |
eClass (6.1) | 37010201 |
UNSPSC (4.03) | 40141600 |
UNSPSC (10.0) | 40141609 |
UNSPSC (11.0501) | 40141609 |
UNSPSC (13.0601) | 40141609 |
UNSPSC (15.1) | 40141609 |
UNSPSC (17.1001) | 40183101 |
資料
類似製品
型番
|
ボディ材質
|
コネクション1 サイズ
|
コネクション1 タイプ
|
コネクション2 サイズ
|
コネクション2 タイプ
|
|
---|---|---|---|---|---|---|
SS-12BG-MM | 316 Stainless Steel | 12 mm | Swagelok® Tube Fitting | 12 mm | Swagelok® Tube Fitting | 製品を見る |
SS-2H | 316 Stainless Steel | 1/8 in. | Swagelok® Tube Fitting | 1/8 in. | - | 製品を見る |
SS-2H2 | 316 Stainless Steel | 1/8 in. | Male NPT | 1/8 in. | Male NPT | 製品を見る |
SS-4BG | 316 Stainless Steel | 1/4 in. | Swagelok® Tube Fitting | 1/4 in. | Swagelok® Tube Fitting | 製品を見る |
SS-4BG-TW | 316 Stainless Steel | 1/4 in. | Tube Socket Weld | 3/8 in. | Tube Butt Weld | 製品を見る |
SS-4BG-V51 | 316 Stainless Steel | 1/4 in. | Face Seal (Metal Gasket) Female VCR | 1/4 in. | Face Seal (Metal Gasket) Female VCR | 製品を見る |
SS-4BK | 316 Stainless Steel | 1/4 in. | Swagelok® Tube Fitting | 1/4 in. | Swagelok® Tube Fitting | 製品を見る |
SS-4BKT | 316 Stainless Steel | 1/4 in. | Swagelok® Tube Fitting | 1/4 in. | Swagelok® Tube Fitting | 製品を見る |
SS-4BKT-V51 | 316 Stainless Steel | 1/4 in. | Face Seal (Metal Gasket) Female VCR | 1/4 in. | Face Seal (Metal Gasket) Female VCR | 製品を見る |
SS-4BK-TW | 316 Stainless Steel | 1/4 in. | Tube Socket Weld | 3/8 in. | Tube Butt Weld | 製品を見る |
SS-4BK-V51 | 316 Stainless Steel | 1/4 in. | Face Seal (Metal Gasket) Female VCR | 1/4 in. | Face Seal (Metal Gasket) Female VCR | 製品を見る |
SS-4BK-VCR | 316 Stainless Steel | 1/4 in. | Face Seal (Metal Gasket) Male VCR | 1/4 in. | Face Seal (Metal Gasket) Male VCR | 製品を見る |
SS-4BRG | 316 Stainless Steel | 1/4 in. | Swagelok® Tube Fitting | 1/4 in. | Swagelok® Tube Fitting | 製品を見る |
SS-4BW | 316 Stainless Steel | 1/4 in. | Swagelok® Tube Fitting | 1/4 in. | Swagelok® Tube Fitting | 製品を見る |
SS-4BW-V51 | 316 Stainless Steel | 1/4 in. | Face Seal (Metal Gasket) Female VCR | 1/4 in. | Face Seal (Metal Gasket) Female VCR | 製品を見る |
SS-4H2 | Acero inoxidable 316 | 1/4 pulg. | NPT macho | 1/4 pulg. | NPT macho | 製品を見る |
SS-4H4 | Acero inoxidable 316 | 1/4 pulg. | NPT hembra | 1/4 pulg. | NPT hembra | 製品を見る |
SS-4H-SC11 | Acero inoxidable 316 | 1/4 pulg. | Racor Swagelok® | 1/4 pulg. | - | 製品を見る |
SS-4H-TH3 | Acero inoxidable 316 | 1/4 pulg. | Extensión de Tubo | 1/4 pulg. | Extensión de Tubo | 製品を見る |
SS-4H-TW | Acero inoxidable 316 | 1/4 pulg. | Soldadura de tubo por encastre | 3/8 pulg. | Soldadura de tubo a tope | 製品を見る |
SS-4H-V13 | Acero inoxidable 316 | 1/4 pulg. | Cierre frontal (Junta plana) VCR hembra, Soldado por encastre | 1/4 pulg. | Cierre frontal (Junta plana) VCR hembra, Soldado por encastre | 製品を見る |
SS-4H-V51 | Acero inoxidable 316 | 1/4 pulg. | Cierre frontal con junta plana metálica VCR® hembra soldado a tope | 1/4 pulg. | Cierre frontal con junta plana metálica VCR® hembra soldado a tope | 製品を見る |
SS-4H-VCR | Acero inoxidable 316 | 1/4 pulg. | Cierre frontal (junta plana) macho VCR | 1/4 pulg. | Cierre frontal (junta plana) macho VCR | 製品を見る |
SS-6BG | Acero inoxidable 316 | 3/8 pulg. | Racor Swagelok® | 3/8 pulg. | Racor Swagelok® | 製品を見る |
SS-6BG-MM | Acero inoxidable 316 | 6 mm | Racor Swagelok® | 6 mm | Racor Swagelok® | 製品を見る |
SS-6BK | Acero inoxidable 316 | 3/8 pulg. | Racor Swagelok® | 3/8 pulg. | Racor Swagelok® | 製品を見る |
SS-6BW | Acero inoxidable 316 | 3/8 pulg. | Racor Swagelok® | 3/8 pulg. | Racor Swagelok® | 製品を見る |
SS-6H-MM | Acero inoxidable 316 | 6 mm | Racor Swagelok® | 6 mm | Racor Swagelok® | 製品を見る |
SS-8BG | Acero inoxidable 316 | 1/2 pulg. | Racor Swagelok® | 1/2 pulg. | Racor Swagelok® | 製品を見る |
SS-8BG-TW | Acero inoxidable 316 | 1/2 pulg. | Soldadura de tubo por encastre | 3/4 pulg. | Soldadura de tubo por encastre | 製品を見る |
SS-8BG-VCR | Acero inoxidable 316 | 1/2 pulg. | Cierre frontal (junta plana) macho VCR | 1/2 pulg. | Cierre frontal (junta plana) macho VCR | 製品を見る |
SS-8BK | Acero inoxidable 316 | 1/2 pulg. | Racor Swagelok® | 1/2 pulg. | Racor Swagelok® | 製品を見る |
SS-8BK-VCR | Acero inoxidable 316 | 1/2 pulg. | Cierre frontal (junta plana) macho VCR | 1/2 pulg. | Cierre frontal (junta plana) macho VCR | 製品を見る |
SS-8BW | Acero inoxidable 316 | 1/2 pulg. | Racor Swagelok® | 1/2 pulg. | Racor Swagelok® | 製品を見る |
Contacto
Si tiene preguntas sobre este producto, contacte con su centro local autorizado de ventas y servicio. También pueden informarle sobre los servicios de apoyo para ayudarle a sacar el máximo partido a su inversión.