Swagelok® 튜브 피팅 및 어댑터
재조립 후에도 누설 없는 밀폐 성능, 탁월한 튜브 그립, 진동 내성을 제공하는 2-페럴 튜브 피팅으로 누설과 가동 중단을 줄여 보십시오.
튜브 피팅 | 설치가 간편하므로 설치 작업자의 피로를 줄일 수 있습니다.
튜브 어댑터 | 다양한 연결구를 지원하며 까다로운 정렬 문제를 해소하는 데 유용합니다.
Swagelok 피팅은 다양한 산업 전반에서 다른 제품에 비해 누설 위험과 많은 비용을 초래하는 가동 중단을 줄이는 데 뛰어납니다. 첨단 후위 페럴 구조는 응력을 격리하여 진동, 굽힘, 변형에 견딜 수 있으며, 특허 기술인 탄화 공정으로 내식성 저하 없이 강도가 보강되었습니다. 설치와 재조립이 쉬운 Swagelok 피팅은 다른 제품보다 필요한 노력이 더 적습니다.
튜브 피팅과 어댑터 피팅은 화학적 호환성을 보장할 수 있도록 다양한 합금으로 공급되며, 올바른 설치에 필요한 전문가 강의 교육이 제공됩니다. Swagelok 튜브 어댑터는 다른 어떤 Swagelok 튜브 피팅과도 함께 사용할 수 있으므로 전용 엘보우 및 티를 비축할 필요가 없습니다. 316 스테인리스강 및 316 Ti 스테인리스강 합금 튜빙과 함께 사용되는 스테인리스강 Swagelok 튜브 피팅은 ECE R110 요구 사항에 따른 테스트를 거쳤으며 EC-79 인증 제품도 공급 가능합니다. Swagelok은 NACE MR0175/ISO 15156 및 MR0103의 금속공학적 요구 조건을 충족하는 재질의 피팅을 공급합니다. 또한, 2507 및 6MO 합금으로 제조된 피팅은 기본적으로 NORSOK M-630 및 M-650 규격을 준수합니다.
Tube Fitting and Tube Adapter Categories
Bulkheads
Bulkhead tube fittings and adapters are designed to help make a connection between two sides of a partion and are available in a range of sizes and connections for your application.
Caps and Plugs
Tube fitting caps and plugs are available in a range of materials and sizes to enable leak-tight sealing and enhanced system safety in a range of applications.
Female Connectors
Female connector tube fittings, available in a range of materials, sizes and configurations, deliver a leak-tight seal that is resistant to vibration fatigue.
Fusible Tube Adapters
Fusible tube adapter fittings enhance the overall safety of your industrial fluid system by releasing pressure to atmosphere at a given temperature.
Low Dead Volume Unions
Swagelok low dead volume tube fittings are engineered to reliably increase the overall efficiency of your industrial fluid system, even in harsh environments.
Male Connectors
Male connector tube fittings, available in a range of materials, sizes and configurations, deliver a leak-tight seal that is resistant to vibration fatigue.
Mud Daubers
Browse mud dauber fittings (vent protectors) designed with a mesh wire screen to prevent insects and other foreign objects from clogging or damaging systems.
Port Connectors
Swagelok port connectors enable fitting-to-fitting connections, offer consistent gaugeability upon installation, and are easy to disconnect and retighten.
Reducers
Tube fitting reducing straights and tees are available in a variety of materials and provide easy installation and consistent gaugeability.
Socket Weld Fittings
Socket weld tube fittings enable proper alignment in small bore fluid systems. Available in multiple sizes and configurations to fit your application.
Spare Parts and Accessories
Explore tube fitting replacement parts and accessories—front ferrules, back ferrules, nuts, gaskets, o-rings, gap inspection gauges, wrenches—and more.
Tube Adapters
Tube adapter straights, elbows and tees allow for fitting-to-fitting connections between a Swagelok tube fitting and a variety of other end connection types.
Unions
Tube fitting union straights, elbows, tees, and crosses in a variety of materials and sizes provide excellent vibration fatigue resistance and tube support.
Zero Volume Reducers
Browse zero volume tube fitting reducers engineered to reliably increase the overall efficiency of your industrial fluid system.
튜브 피팅 및 어댑터 카탈로그
1/16~2인치 및 2~50mm 튜브 크기와 다양한 구성으로 공급되는 Swagelok 튜브 피팅과 튜브 어댑터는 케미칼 가공 및 Sour 가스를 포함한 광범위한 애플리케이션에서 탁월한 내부식성을 제공하는 다양한 재질로 제조됩니다. 여기에 있는 제품 자료에서 구성 재질, 압력 및 온도 등급, 공구 및 액세서리, 설치 지침을 포함한 자세한 제품 정보를 확인하실 수 있습니다.
The proven Swagelok® tube fitting design manufactured from corrosion-resistant alloy 2507 with NORSOK M0630 and M-650 compliance standard, NACE MR0175/ISO 15156 optional.
V, VB, and VL series 2-, 3-, and 5-valve instrument manifolds; VE series 2-, 3-, and 5-valve direct-mount manifolds; 2-valve remote-mount manifolds; Mod 85 modular instrumentation systems
Features: Temperatures from 70 to 400°F (20 to 204°C); Working pressures up to 275 psig (18.9 bar); Sizes from 1/8 to 1/2 in.
Features: Suitable for liquid or gas chromatography; 316 stainless steel construction; Offered in sizes from 1/16 to 1/2 in.
Features: Stainless steel construction, fluorocarbon FKM O-ring; Reliable, repeatable sealing performance; Available in tube sizes from 1/16 to 1 1/2 in.
Swagelok® tube fittings and tube adapters reduce the risk of costly system downtime with reliable tubing connections and are available in a variety of sizes and materials.
Optimize sealing and minimize galling with pipe fittings manufactured to Swagelok's high quality standards in configurations such as pipe adapters and couplings.
Rechercher des raccords pour moyennes et hautes pressions
Vous êtes à la recherche de raccords pouvant supporter des pressions supérieures à 757 bar (11 000 psi) ? Découvrez nos raccords pour tubes série FK prévus pour des pressions allant jusqu’à 1551 bar (22 500 psi) ainsi que nos raccords filetés à extrémité conique conçus pour résister à des pressions pouvant atteindre 4134 bar (60 000 psi).
Trouver des pressions nominales plus élevéesLes ressources de Swagelok sélectionnées pour vous
Introduction aux raccords : déterminer le diamètre et le pas d’un filetage
Même les professionnels les plus aguerris peuvent avoir des difficultés à déterminer un filetage. Andy Hitchcock, responsable produit chez Swagelok, explique comment déterminer le diamètre et le pas des filetages de vos raccords à l’aide d’un pied à coulisse, d’un peigne à filet et d’un guide de détermination des filetages.
Optimiser des applications pétrolières et gazières mettant en œuvre des pressions moyennes avec des raccords à compression
Pour des applications moyenne pression dans des installations pétrolières et gazières de surface, découvrez les avantages des raccords à compression par rapport aux traditionnels raccords filetés à extrémité conique en termes de vitesse d’installation et de performance.
How Shenyang Blower Works Group Improved Safety and Reliability
Learn how Swagelok Shanghai has helped Shenyang Blower Works Group Corporation achieve consistency, reliability, and cost savings for its customers while improving its own safety and production efficiency.
How Tube Adapters Can Eliminate Alignment Issues
Tube adapters can help eliminate difficult alignment positions while also reducing inventory. Watch this demonstration of how to use Swagelok® tube adapters to fix alignment problems while delivering a leak-tight seal.
Since 1947, Swagelok has been the leader in advancing tube fitting technology used in industrial fluid system application across nearly every industry.
Swagelok Founder Explains His Revolutionary Tube Fitting
More than 75 years later, the Swagelok tube fitting, with its unique “hinging-colleting” action, remains trusted to provide lasting, leak-tight service. The grip-type design uses the “hinging and colleting” action to achieve optimal performance in three key areas:
Tube Grip
The hinging and colleting action provides more direct tube contact/gripping support.
Gas Seal
The burnishing/polishing action of the front ferrule creates concentrated zones of contact on the tube and on the body bevel for a stronger seal.
Vibration Resistance
The colleting region better isolates stress risers at the tube grip to resist bending, deflection, and vibration.
Swagelok® Tube Fitting Design
The advanced-geometry, hinging-colleting back ferrule design is standard on all 1/4 to 1 in. and 6 to 25 mm Swagelok stainless steel tube fittings to help installers make more consistent, leak-tight tube connections. In these sizes, a patented case hardening process and patented recessed and contoured geometry provide unique engineering to the Swagelok back ferrule. The hinging-colleting back ferrule design expands on the already robust performance of the traditional ferrule design.