Les catalogues doivent être lus en entier afin d'assurer une sélection adéquate des produits par le concepteur et l'utilisateur du système. Lors de la sélection des produits, l'intégralité de la conception du système doit être prise en considération pour garantir un fonctionnement fiable et sans incident. La responsabilité de l'utilisation, de la compatibilité des matériaux, du choix de capacités nominales appropriées, d'une installation, d'un fonctionnement et d'une maintenance corrects incombe au concepteur et à l'utilisateur du système.
Attention: スウェージロック製品、または工業設計規格に準拠していない部品(Swagelokチューブ継手エンド・コネクションを含む)は、他社製品との混用や互換は絶対に行わないでください。
HVCR-Schweißstutzen, Edelstahl 316L VAR, für hohen Durchfluss, 1/4 Zoll HVCR-Stutzen - 3/8 Zoll x 0,035" Rohrstumpfschweißenden, Rohrlänge 25,4 mm (1,00 Zoll), SC-01 gereinigt
Ouvrir une session ou s’inscrire pour afficher des prix
Catalogues
Embouts
Réalisez un raccordement étanche tout en conservant la haute pureté d'un joint métal sur métal avec les raccords à étanchéité de surface VCR® Swagelok.
Swagelok® VCR® fittings are the original metal gasket face seal design for a high-purity, metal-to-metal seal. A range of shapes, sizes, and connections are available.
Features: Step-by-step identification procedure for threads and end connections.
This document specifies guidelines used by Swagelok Company for producing stainless steel products intended for photovoltaic (PV) applications.
This document specifies guidelines used by Swagelok® Company and its suppliers to ensure compliance with product cleanliness requirements as stated in ASTM G93 Level C. Application of the document is limited to wetted system components. This document must be used in conjunction with product catalogs, technical bulletins, and reports.
Scope: This document specificies guidelines used by Swagelok® Company for producing ultrahigh-purity (UHP) electropolished stainless steel products as well as ultrahigh-purity plastic products. This document must be used in conjunction with product catalogs, technical bulletins, and reports for complete product information.
Spécifications
Attribut | Valeur |
---|---|
Matériau du corps | 316L VARステンレス鋼 |
Procédé de nettoyage | 超高純度工程仕様(Swagelok SC-01仕様) |
Dimension du raccordement 1 | 1/4 インチ |
Type du raccordement 1 | 大流量用VCR® メタル・ガスケット式面シール継手 グランド |
Dimension du raccordement 2 | 3/8 インチ |
Type du raccordement 2 | チューブ突き合わせ溶接 |
Caractéristique | 大流量用、電解研磨仕上げ |
Réducteur de débit | Non |
eClass (4.1) | 37020713 |
eClass (5.1.4) | 37920191 |
eClass (6.0) | 22569200 |
eClass (6.1) | 37029290 |
UNSPSC (4.03) | 31163000 |
UNSPSC (10.0) | 40142613 |
UNSPSC (11.0501) | 40142610 |
UNSPSC (13.0601) | 40183107 |
UNSPSC (15.1) | 40183107 |
UNSPSC (17.1001) | 31160000 |
Ressources
Produits similaires
Réf. pièce
|
Matériau du corps
|
Dimension du raccordement 1
|
Type du raccordement 1
|
Dimension du raccordement 2
|
Type du raccordement 2
|
|
---|---|---|---|---|---|---|
6LV-12-VCR-3-12TB7-065P | 316L VAR | 3/4 in. | VCR® Metal Gasket Face Seal Gland | 3/4 in. | Tube Butt Weld | Afficher le produit |
6LV-4-HVCR-3-.60SR | 316L VAR | 1/4 in. | High-Flow VCR® Metal Gasket Face Seal Gland | 3/8 in. | Tube Butt Weld | Afficher le produit |
6LV-4-HVCR-3-.60SRP | 316L VAR | 1/4 in. | High-Flow VCR® Metal Gasket Face Seal Gland | 3/8 in. | Tube Butt Weld | Afficher le produit |
6LV-4-HVCR-3-1.19SR | 316L VAR | 1/4 in. | High-Flow VCR® Metal Gasket Face Seal Gland | 3/8 in. | Tube Butt Weld | Afficher le produit |
6LV-4-HVCR-3-1.31SR | 316L VAR | 1/4 in. | High-Flow VCR® Metal Gasket Face Seal Gland | 3/8 in. | Tube Butt Weld | Afficher le produit |
6LV-4-HVCR-3-1.31SRP | 316L VAR | 1/4 in. | High-Flow VCR® Metal Gasket Face Seal Gland | 3/8 in. | Tube Butt Weld | Afficher le produit |
6LVV-4-HVCR-3-1.19SRP | 316L VIM VAR | 1/4 in. | High-Flow VCR® Metal Gasket Face Seal Gland | 3/8 in. | Tube Butt Weld | Afficher le produit |
6LVV-4-VCR-3-4TB2P | 316L VIM VAR | 1/4 in. | VCR® Metal Gasket Face Seal Gland | 1/4 in. | Tube Butt Weld | Afficher le produit |
6LVV-4-VCR-3-4TB7P | 316L VIM VAR | 1/4 in. | VCR® Metal Gasket Face Seal Gland | 1/4 in. | Tube Butt Weld | Afficher le produit |
6LVV-8-VCR-3-8TB3P | 316L VIM VAR | 1/2 in. | VCR® Metal Gasket Face Seal Gland | 1/2 in. | Tube Butt Weld | Afficher le produit |
6LVV-8-VCR-3-8TB7P | 316L VIM VAR | 1/2 in. | VCR® Metal Gasket Face Seal Gland | 1/2 in. | Tube Butt Weld | Afficher le produit |
SS-10-VCR-3 | 316 Stainless Steel | 5/8 in. | VCR® Metal Gasket Face Seal Gland | 5/8 in. | Tube Socket Weld | Afficher le produit |
SS-12-VCR-3 | 316 Stainless Steel | 3/4 in. | VCR® Metal Gasket Face Seal Gland | 3/4 in. | Tube Socket Weld | Afficher le produit |
SS-12-VCR-3-12MTW | 316 Stainless Steel | 3/4 in. | VCR® Metal Gasket Face Seal Gland | 3/4 in. | Male Weld | Afficher le produit |
SS-12-VCR-3-12TA | 316 Stainless Steel | 3/4 in. | VCR® Metal Gasket Face Seal Gland | 3/4 in. | Swagelok® Tube Adapter | Afficher le produit |
SS-12-VCR-3-BL | 316 Stainless Steel | 3/4 in. | Blind (Undrilled) VCR® Metal Gasket Face Seal Gland | - | - | Afficher le produit |
SS-16-VCR-3 | 316 Stainless Steel | 1 in. | VCR® Metal Gasket Face Seal Gland | 1 in. | Tube Socket Weld | Afficher le produit |
SS-16-VCR-3-16MTW | 316 Stainless Steel | 1 in. | VCR® Metal Gasket Face Seal Gland | 1 in. | Male Weld | Afficher le produit |
SS-1-VCR-3 | 316 Stainless Steel | 1/16 in. | VCR® Metal Gasket Face Seal Gland | 1/16 in. | Tube Socket Weld | Afficher le produit |
SS-2-VCR-3 | 316 Stainless Steel | 1/8 in. | VCR® Metal Gasket Face Seal Gland | 1/8 in. | Tube Socket Weld | Afficher le produit |
SS-2-VCR-3-2MTW | 316 Stainless Steel | 1/8 in. | VCR® Metal Gasket Face Seal Gland | 1/8 in. | Male Weld | Afficher le produit |
SS-2-VCR-3-2TA | 316 Stainless Steel | 1/8 in. | VCR® Metal Gasket Face Seal Gland | 1/8 in. | Swagelok® Tube Adapter | Afficher le produit |
SS-2-VCR-3-BL | Edelstahl 316 | 1/8 Zoll | VCR®-Blindstutzen (ungebohrt) mit Metalldichtscheibe für hohen Durchfluss | - | - | Afficher le produit |
SS-4-VCR-3 | Edelstahl 316 | 1/4 Zoll | VCR®-Schweißstutzen mit Metalldichtscheibe | 1/4 Zoll | Muffenschweißende | Afficher le produit |
SS-4-VCR-3-2MTW | Edelstahl 316 | 1/4 Zoll | VCR®-Schweißstutzen mit Metalldichtscheibe | 1/8 Zoll | Schweißstutzen | Afficher le produit |
SS-4-VCR-3-2TSW | Edelstahl 316 | 1/4 Zoll | VCR®-Schweißstutzen mit Metalldichtscheibe | 1/8 Zoll | Muffenschweißende | Afficher le produit |
SS-4-VCR-3-4MTW | Edelstahl 316 | 1/4 Zoll | VCR®-Schweißstutzen mit Metalldichtscheibe | 1/4 Zoll | Schweißstutzen | Afficher le produit |
SS-4-VCR-3-4TA | Edelstahl 316 | 1/4 Zoll | VCR®-Schweißstutzen mit Metalldichtscheibe | 1/4 Zoll | Swagelok® Rohrstutzen | Afficher le produit |
SS-4-VCR-3-6MTA | Edelstahl 316 | 1/4 Zoll | VCR®-Schweißstutzen mit Metalldichtscheibe | 6 mm | Swagelok® Rohrstutzen | Afficher le produit |
SS-4-VCR-3-BL | Edelstahl 316 | 1/4 Zoll | VCR®-Blindstutzen (ungebohrt) mit Metalldichtscheibe für hohen Durchfluss | - | - | Afficher le produit |
SS-6-VCR-3 | Edelstahl 316 | 3/8 Zoll | VCR®-Schweißstutzen mit Metalldichtscheibe | 3/8 Zoll | Muffenschweißende | Afficher le produit |
SS-8-VCR-3 | Edelstahl 316 | 1/2 Zoll | VCR®-Schweißstutzen mit Metalldichtscheibe | 1/2 Zoll | Muffenschweißende | Afficher le produit |
SS-8-VCR-3-4MTW | Edelstahl 316 | 1/2 Zoll | VCR®-Schweißstutzen mit Metalldichtscheibe | 1/4 Zoll | Schweißstutzen | Afficher le produit |
SS-8-VCR-3-4TSW | Edelstahl 316 | 1/2 Zoll | VCR®-Schweißstutzen mit Metalldichtscheibe | 1/4 Zoll | Muffenschweißende | Afficher le produit |
SS-8-VCR-3-6MTW | Edelstahl 316 | 1/2 Zoll | VCR®-Schweißstutzen mit Metalldichtscheibe | 3/8 Zoll | Schweißstutzen | Afficher le produit |
SS-8-VCR-3-6TA | Edelstahl 316 | 1/2 Zoll | VCR®-Schweißstutzen mit Metalldichtscheibe | 3/8 Zoll | Swagelok® Rohrstutzen | Afficher le produit |
SS-8-VCR-3-8MTW | Edelstahl 316 | 1/2 Zoll | VCR®-Schweißstutzen mit Metalldichtscheibe | 1/2 Zoll | Schweißstutzen | Afficher le produit |
SS-8-VCR-3-8TA | Edelstahl 316 | 1/2 Zoll | VCR®-Schweißstutzen mit Metalldichtscheibe | 1/2 Zoll | Swagelok® Rohrstutzen | Afficher le produit |
SS-8-VCR-3-BL | Edelstahl 316 | 1/2 Zoll | VCR®-Blindstutzen (ungebohrt) mit Metalldichtscheibe für hohen Durchfluss | - | - | Afficher le produit |
Contact
Si vous avez des questions concernant ce produit, prenez contact avec votre distributeur agréé. Celui-ci pourra également vous renseigner sur des services qui vous permettront de tirer le meilleur parti de votre investissement.