El diseñador y usuario del sistema deben revisar la documentación técnica para asegurar una correcta selección de producto. Al seleccionar un producto, habrá que tener en cuenta el diseño global del sistema para conseguir un servicio seguro y sin problemas. El diseñador de la instalación y el usuario son los responsables de la función del componente, de la compatibilidad de los materiales, de los rangos de operación apropiados, así como de la operación y mantenimiento del mismo.
Warnung: No mezcle ni intercambie productos o componentes Swagelok no regulados por normativas de diseño industrial, incluyendo las conexiones finales de los racores Swagelok, con los de otros fabricantes.
Válvula antirretorno de 1 pieza de acero inox., presión de disparo ajustable, 1/4 pulg. NPT hembra, 0,21 a 3,5 bar (3 a 50 psig)
Einloggen oder anmelden, um den Preis anzuzeigen
Kataloge
Presión ajustable
Las válvulas antirretorno controlan el retorno del caudal con un amplio rango de presiones de disparo en aplicaciones de servicio general y de alta pureza.
Pressions de service jusqu’à 413 bar (6000 psig); Pressions de tarage réglables ou fixes; Divers raccordements d’extrémité; Matériaux en acier inoxydable 316 et laiton
Caractéristiques : Procédure d’identification étape par étape des filetages et raccords.
DésserréSerrez l'écrouen tournant dans le sens inverse des aiguilles d'une montre; Inserrez la clé hexagonale à l'intérieurde l'écrou d'ajustement.
Procedure for installing Swagelok tube fittings in sizes over 1 inch or 25 mm.
This document specifies guidelines used by Swagelok® Company and its suppliers to ensure compliance with product cleanliness requirements as stated in ASTM G93 Level C. Application of the document is limited to wetted system components. This document must be used in conjunction with product catalogs, technical bulletins, and reports.
Swagelok® Specification SC-10 defines the cleaning, lubrication, assembly, and packaging requirements for standard Swagelok products and describes practices used to meet these requirements.
Valve sizing often is described by the nominal size of the end connections, but a more important measure is the flow that the valve can provide. And determining flow through a valve can be simple.
Pages 1-3. Features: installation in high-pressure applications and high safety-factor systems.
Technische Daten
Attribute | Wert |
---|---|
Körperwerkstoff | Acero inoxidable 316 |
Reinigungsverfahren | Limpieza y Embalaje estándar (SC-10) |
Größe Verbindung 1 | 1/4 pulg. |
Typ Verbindung 1 | NPT hembra |
Größe Verbindung 2 | 1/4 pulg. |
Typ Verbindung 2 | NPT hembra |
Öffnungsdruck | 0,21 a 3,5 bar (3 a 50 psi, 0,021 a 0,35 MPa) |
Maximaler Cv | 0.35 |
O-Ring-Material | FKM Fluorocarbono |
Raumtemperatur-Druckeinsatzbereich | 206 BAR @ 37°C / 3000 PSIG @ 100°F |
Oberflächengüte | Estándar |
Prüfung | Sin prueba opcional |
eClass (4.1) | 37010801 |
eClass (5.1.4) | 27300400 |
eClass (6.0) | 27300601 |
eClass (6.1) | 27300601 |
UNSPSC (4.03) | 40141601 |
UNSPSC (10.0) | 40141641 |
UNSPSC (11.0501) | 40141641 |
UNSPSC (13.0601) | 40141641 |
UNSPSC (15.1) | 40141641 |
UNSPSC (17.1001) | 40183101 |
Ressourcen
Zeichnungen
Für dieses Produkt sind zweidimensionale Darstellungen verfügbar. Die CAD-Datei herunterladen.
Für dieses Produkt sind dreidimensionale Darstellungen verfügbar. Die CAD-Datei herunterladen.
Verkaufszeichnungen sind für dieses Produkt erhältlich. Die Dateien herunterladen.
Ähnliche Produkte
Art.-Nr.
|
Körperwerkstoff
|
Größe Verbindung 1
|
Typ Verbindung 1
|
Größe Verbindung 2
|
Typ Verbindung 2
|
|
---|---|---|---|---|---|---|
B-4CA-3 | Laiton | 1/4 po | Raccord Swagelok® pour tubes | 1/4 po | Raccord Swagelok® pour tubes | Produkt anzeigen |
B-4CPA2-150 | Laiton | 1/4 po | Filetage NPT mâle | 1/4 po | Filetage NPT mâle | Produkt anzeigen |
B-4CPA2-3 | Laiton | 1/4 po | Filetage NPT mâle | 1/4 po | Filetage NPT mâle | Produkt anzeigen |
B-4CPA2-350 | Laiton | 1/4 po | Filetage NPT mâle | 1/4 po | Filetage NPT mâle | Produkt anzeigen |
B-4CPA2-50 | Laiton | 1/4 po | Filetage NPT mâle | 1/4 po | Filetage NPT mâle | Produkt anzeigen |
B-4CPA4-3 | Laiton | 1/4 po | Filetage NPT femelle | 1/4 po | Filetage NPT femelle | Produkt anzeigen |
B-8CPA2-150 | Laiton | 1/2 po | Filetage NPT mâle | 1/2 po | Filetage NPT mâle | Produkt anzeigen |
B-8CPA2-50 | Laiton | 1/2 po | Filetage NPT mâle | 1/2 po | Filetage NPT mâle | Produkt anzeigen |
SS-4CA-150 | Acier inoxydable 316 | 1/4 po | Raccord Swagelok® pour tubes | 1/4 po | Raccord Swagelok® pour tubes | Produkt anzeigen |
SS-4CA-3 | Acier inoxydable 316 | 1/4 po | Raccord Swagelok® pour tubes | 1/4 po | Raccord Swagelok® pour tubes | Produkt anzeigen |
SS-4CA-350 | Acier inoxydable 316 | 1/4 po | Raccord Swagelok® pour tubes | 1/4 po | Raccord Swagelok® pour tubes | Produkt anzeigen |
SS-4CA-50 | Acier inoxydable 316 | 1/4 po | Raccord Swagelok® pour tubes | 1/4 po | Raccord Swagelok® pour tubes | Produkt anzeigen |
SS-4CA-KZ-3 | Acier inoxydable 316 | 1/4 po | Raccord Swagelok® pour tubes | 1/4 po | Raccord Swagelok® pour tubes | Produkt anzeigen |
SS-4CA-VCR-150 | Acier inoxydable 316 | 1/4 po | Raccord à étanchéité de surface (joint métallique) VCR mâle | 1/4 po | Raccord à étanchéité de surface (joint métallique) VCR mâle | Produkt anzeigen |
SS-4CA-VCR-3 | Acier inoxydable 316 | 1/4 po | Raccord à étanchéité de surface (joint métallique) VCR mâle | 1/4 po | Raccord à étanchéité de surface (joint métallique) VCR mâle | Produkt anzeigen |
SS-4CA-VCR-50 | Acier inoxydable 316 | 1/4 po | Raccord à étanchéité de surface (joint métallique) VCR mâle | 1/4 po | Raccord à étanchéité de surface (joint métallique) VCR mâle | Produkt anzeigen |
SS-4CPA2-150 | Acier inoxydable 316 | 1/4 po | Filetage NPT mâle | 1/4 po | Filetage NPT mâle | Produkt anzeigen |
SS-4CPA2-3 | Acier inoxydable 316 | 1/4 po | Filetage NPT mâle | 1/4 po | Filetage NPT mâle | Produkt anzeigen |
SS-4CPA2-350 | Acier inoxydable 316 | 1/4 po | Filetage NPT mâle | 1/4 po | Filetage NPT mâle | Produkt anzeigen |
SS-4CPA2-50 | Acier inoxydable 316 | 1/4 po | Filetage NPT mâle | 1/4 po | Filetage NPT mâle | Produkt anzeigen |
SS-4CPA2-RT-3 | Acier inoxydable 316 | 1/4 po | Filetage conique ISO mâle | 1/4 po | Filetage conique ISO mâle | Produkt anzeigen |
SS-4CPA2-RT-50 | Acier inoxydable 316 | 1/4 po | Filetage conique ISO mâle | 1/4 po | Filetage conique ISO mâle | Produkt anzeigen |
SS-4CPA4-150 | Acier inoxydable 316 | 1/4 po | Filetage NPT femelle | 1/4 po | Filetage NPT femelle | Produkt anzeigen |
SS-4CPA4-50 | Acier inoxydable 316 | 1/4 po | Filetage NPT femelle | 1/4 po | Filetage NPT femelle | Produkt anzeigen |
SS-6CA-MM-3 | Acier inoxydable 316 | 6 mm | Raccord Swagelok® pour tubes | 6 mm | Raccord Swagelok® pour tubes | Produkt anzeigen |
SS-8CA-MM-3 | Acier inoxydable 316 | 8 mm | Raccord Swagelok® pour tubes | 8 mm | Raccord Swagelok® pour tubes | Produkt anzeigen |
SS-8CPA2-150 | Acier inoxydable 316 | 1/2 po | Filetage NPT mâle | 1/2 po | Filetage NPT mâle | Produkt anzeigen |
SS-8CPA2-3 | Acier inoxydable 316 | 1/2 po | Filetage NPT mâle | 1/2 po | Filetage NPT mâle | Produkt anzeigen |
SS-8CPA2-350 | Acier inoxydable 316 | 1/2 po | Filetage NPT mâle | 1/2 po | Filetage NPT mâle | Produkt anzeigen |
SS-8CPA2-50 | Acier inoxydable 316 | 1/2 po | Filetage NPT mâle | 1/2 po | Filetage NPT mâle | Produkt anzeigen |
SS-8CPA2-DR-50 | Acier inoxydable 316 | 1/2 po | Filetage NPT mâle | 1/2 po | Filetage NPT mâle | Produkt anzeigen |
SS-8CPA2-RT-3 | Acier inoxydable 316 | 1/2 po | Filetage conique ISO mâle | 1/2 po | Filetage conique ISO mâle | Produkt anzeigen |
Contacto
Si tiene preguntas sobre este producto, contacte con su centro local autorizado de ventas y servicio. También pueden informarle sobre los servicios de apoyo para ayudarle a sacar el máximo partido a su inversión.