Les catalogues doivent être lus en entier afin d'assurer une sélection adéquate des produits par le concepteur et l'utilisateur du système. Lors de la sélection des produits, l'intégralité de la conception du système doit être prise en considération pour garantir un fonctionnement fiable et sans incident. La responsabilité de l'utilisation, de la compatibilité des matériaux, du choix de capacités nominales appropriées, d'une installation, d'un fonctionnement et d'une maintenance corrects incombe au concepteur et à l'utilisateur du système.
Attention: 스웨즈락의 튜브 피팅 연결구를 포함하여 이러한 제품은 산업 설계 기준에 따라 제조되지 않으므로 스웨즈락의 제품 및 부품을 타 제조업체의 제품 및 부품과 혼합하거나 혼용하여 사용하지 마십시오.
스테인리스강 원피스 40 시리즈 7-Way 볼 밸브, 0.07Cv, 1/8인치, Female Swagelok 튜브 피팅
Ouvrir une session ou s’inscrire pour afficher des prix
Catalogues
7-Way 방향 전환형
40 시리즈 원피스(1-Piece) 계장용 볼 밸브는 다양한 산업에서 40여년 동안 믿을 수 있는 성능을 수행해왔습니다. 스웨즈락은 밸브 구조를 수정하고 혁신적인 조립 프로세스를 개발했습니다. 그 결과인 40G 시리즈 볼 밸브는 사용 온도 범위가 확장되고 온도 싸이클링 능력이 개선되었으며, 누설 가능성이 줄어들었습니다.
개폐형, 방향전환형 및 교차형 유로; 최대 사용 압력 3000 psig (206 bar); 온도 범위 –53 ~ 148°C (–65 ~ 300°F); 실외 환경 및 고온 공정용 사양; 1/16 ~ 3/4 in. 및 3 ~ 12 mm 연결구
Features: Swagelok® electric actuators can be used to control the position of many Swagelok ball valves; alternating- and direct-current models are available. An electrical signal is used to change valve position from remote locations. Integral limit switches provide an output signal of the valve position, even between positions.
Note orientation of the directional handle. Bar handle must be installed pointing in the same direction as the removed handle; Loosen set screw; Remove current handle. Also remove the handle stop insert when applicable.
40 series ball valve (standard) packing adjustment instructions, multilingual
If the valve handle is removed, please note its orientation; When reinstalled, the handle must be in the same orientation.
Features: Limits access to manually actuated valves;Lockout accessory enables compliance with OSHA Lockout/Tagout, Standard 29 CFR Part 1910.147, Control of Hazardous Energy Bright safety orange color promotes high visibility. Other colors are available.
This document contains instructions for replacing a standard valve handle with a latch/lock handle on the following 3-way ball valves:
Features: 40G, 40, 60, 83, H83, SK, and FKB Series Valves, AFS Ball Valves; Calculate valve operating torque; Choose actuators and related components; Select mounting bracket kits
Spécifications
| Attribut | Valeur |
|---|---|
| Matériau de boisseau sphérique/tige | 스테인리스강 |
| Matériau du corps | 316 스테인리스강 |
| Procédé de nettoyage | 표준 세정 및 포장(SC-10) |
| Dimension du raccordement 1 | 1/8인치 |
| Type du raccordement 1 | Female Swagelok® 튜브 피팅 |
| Dimension du raccordement 2 | 1/8인치 |
| Type du raccordement 2 | Female Swagelok® 튜브 피팅 |
| Dimension du raccordement 3 | 1/8인치 |
| Type du raccordement 3 | Female Swagelok® 튜브 피팅 |
| Dimension du raccordement 4 | 1/8인치 |
| Type du raccordement 4 | Female Swagelok® 튜브 피팅 |
| Cv maximal | 0.07 |
| Passage d'écoulement | 표준 |
| Type d’écoulement | 7-Way, 방향 전환형 |
| Couleur de poignée | 검정색 |
| Type de poignée | 레버 |
| Certification faibles émissions | 예 |
| Orifice | 0.062인치/1.6mm |
| Matériau de garniture | PTFE |
| Matériau de bague/disque | PTFE 코팅 스테인리스강 |
| Pression nominale à température ambiante | 500PSIG @ 100°F /34.4BAR @ 37°C |
| Catégorie d'usage | 일반 |
| Tests | WS-22에 따른 검사 |
| eClass (4.1) | 37010401 |
| eClass (5.1.4) | 37010401 |
| eClass (6.0) | 37010401 |
| eClass (6.1) | 37010401 |
| UNSPSC (4.03) | 40141607 |
| UNSPSC (10.0) | 40141607 |
| UNSPSC (11.0501) | 40141607 |
| UNSPSC (13.0601) | 40141607 |
| UNSPSC (15.1) | 40141607 |
| UNSPSC (17.1001) | 40141600 |
Ressources
Contact
Si vous avez des questions concernant ce produit, prenez contact avec votre distributeur agréé. Celui-ci pourra également vous renseigner sur des services qui vous permettront de tirer le meilleur parti de votre investissement.