text.skipToContent text.skipToNavigation

"quick connects"の検索結果

担当のスウェージロック指定販売会社では、その他のオプションに対応している場合がございます。

フィルター条件：
  • Engineering Services
すべてのフィルターをクリアする
フィルター条件：
Safe Product Selection

The complete catalog contents must be reviewed to ensure that the system designer and user make a safe product selection. When selecting products, the total system design must be considered to ensure safe, trouble-free performance. Function, material compatibility, adequate ratings, proper installation, operation, and maintenance are the responsibilities of the system designer and user.

⚠ Warning: Do not mix/interchange Swagelok two-ferrule tube-fitting end connection components (or other products not governed by industrial design standards) with those of other manufacturers.

  • API Seal Plan 52 Buffer Fluid Seal Pot

    < Back to Between Seal Plans API Seal Plan 52 utilizes a reservoir and circulates an unpressurized buffer fluid between the inboard and outboard seals. To provide positive circulation through the support system and into the seal, a pumping ring is employed. Frictional losses in the buffer fluid inl...

  • API Plan 53A Barrier Fluid Seal Pot Pressurized by Nitrogen

    API Plan 53A utilizes a reservoir and circulates a pressurized barrier fluid between the inboard and outboard seals. The typical source of pressurization is plant nitrogen. The reservoir should be set at least 20 psi (1.3 bar) above maximum seal chamber pressure. This is to ensure that leakage acros...

  • API Plan 53B Barrier Fluid Pressurized by Bladder Accumulator

    API Plan 53B circulates a pressurized barrier fluid between the inboard and outboard seals. The source of pressurization is a bladder accumulator. Plan 53B has the advantage of not allowing gas absorption into the barrier fluid which may allow for operation at higher pressures than Plan 53A. Barrier...

  • API Plan 53C Barrier Fluid Pressurized by Piston Accumulator

    API Plan 53C circulates a pressurized barrier fluid between the inboard and outboard seals. The source of pressurization is a piston accumulator. Plan 53C is preferred for applications where the seal chamber pressure may vary during pump operation. A sensing line is typically run from the seal chamb...

このプロセスには数分間かかる場合があります。このままお待ちください。