|
Manguito macho hexagonal de Acero inox., 1/4 pulg. NPT macho de pared gruesa, 10.000 psig (689 bar)
Réf. pièce : SS-4-HN-10K
|
||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Spécifications
Manguito hexagonalSeleccione los racores Swagelok de precisión, adaptadores y más, en muchos tamaños y materiales, que mejor se adaptan a su aplicación. Ouvrir une session ou s’inscrire pour afficher des prix ContactSi vous avez des questions concernant ce produit, prenez contact avec votre distributeur agréé. Celui-ci pourra également vous renseigner sur des services qui vous permettront de tirer le meilleur parti de votre investissement.
Sélection des produits en toute sécurité :
Les catalogues doivent être lus en entier afin d'assurer une sélection adéquate des produits par le concepteur et l'utilisateur du système. Lors de la sélection des produits, l'intégralité de la conception du système doit être prise en considération pour garantir un fonctionnement fiable et sans incident. La responsabilité de l'utilisation, de la compatibilité des matériaux, du choix de capacités nominales appropriées, d'une installation, d'un fonctionnement et d'une maintenance corrects incombe au concepteur et à l'utilisateur du système. Attention: No mezcle ni intercambie productos o componentes Swagelok no regulados por normativas de diseño industrial, incluyendo las conexiones finales de los racores Swagelok, con los de otros fabricantes. |
Der Kataloginhalt muss ganz durchgelesen werden, um sicherzustellen, dass der Systementwickler und der Benutzer eine sichere Produktauswahl treffen. Bei der Auswahl von Produkten muss die gesamte Systemanordnung berücksichtigt werden, um eine sichere, störungsfreie Funktion zu gewährleisten. Der Systemdesigner und der Benutzer sind für Funktion, Materialverträglichkeit, entsprechende Leistungsdaten und Einsatzgrenzen sowie für die vorschriftsmäßige Handhabung, den Betrieb und die Wartung verantwortlich.
Attention: No mezcle ni intercambie productos o componentes Swagelok no regulados por normativas de diseño industrial, incluyendo las conexiones finales de los racores Swagelok, con los de otros fabricantes.
Manguito macho hexagonal de Acero inox., 1/4 pulg. NPT macho de pared gruesa, 10.000 psig (689 bar)
Ouvrir une session ou s’inscrire pour afficher des prix
Catalogues
Manguito hexagonal
Размеры от 1/16 до 1 дюйма; Изготавливаются из нержавеющей стали марки 316, латуни и углеродистой сталиl; Резьбы NPT, ISO/BSP и SAE
Жидкие течеискатели Snoop®; Смазки для резьбы Goop™ ; Герметики для трубной резьбы SWAK®, тефлоновая лента и герметики для трубной резьбы без содержания PTFE
Features: Step-by-step identification procedure for threads and end connections.
Swagelok® Specification SC-10 defines the cleaning, lubrication, assembly, and packaging requirements for standard Swagelok products and describes practices used to meet these requirements.
Spécifications
SS-4-HN-10K — Manguito macho hexagonal de Acero inox., 1/4 pulg. NPT macho de pared gruesa, 10.000 psig (689 bar)
| Attribut | Valeur |
|---|---|
| Material del Cuerpo | Acero inoxidable 316 |
| Proceso de Limpieza | Limpieza y Embalaje estándar (SC-10) |
| Tamaño conexión 1 | 1/4 pulg. |
| Tipo de conexión 1 | NPT Macho de Pared Gruesa |
| Tamaño conexión 2 | 1/4 pulg. |
| Tipo de conexión 2 | NPT Macho de Pared Gruesa |
| Limitador de Caudal | No |
| eClass (4.1) | 37021016 |
| eClass (5.1.4) | 37020590 |
| eClass (6.0) | 22560206 |
| eClass (6.1) | 37020590 |
| eClass (10.1) | 37020590 |
| UNSPSC (4.03) | 40141715 |
| UNSPSC (10.0) | 40173303 |
| UNSPSC (11.0501) | 40142318 |
| UNSPSC (13.0601) | 40173303 |
| UNSPSC (15.1) | 40173303 |
| UNSPSC (17.1001) | 40141602 |
Ressources
Produits similaires
|
Réf. pièce
|
Matériau du corps
|
Dimension du raccordement 1
|
Type du raccordement 1
|
Dimension du raccordement 2
|
Type du raccordement 2
|
|
|---|---|---|---|---|---|---|
| 2507-8-HN-SG2 | Super Duplex Stainless Steel | 1/2 in. | Male NPT | 1/2 in. | Male NPT | Afficher le produit |
| B-4-HN | Латунь | 1/4 дюйма | Наруж. резьба NPT | 1/4 дюйма | Наруж. резьба NPT | Afficher le produit |
| B-8-HN | Латунь | 1/2 дюйма | Наруж. резьба NPT | 1/2 дюйма | Наруж. резьба NPT | Afficher le produit |
| M-8-HN | Сплав 400 | 1/2 дюйма | Наруж. резьба NPT | 1/2 дюйма | Наруж. резьба NPT | Afficher le produit |
| SS-12-HN | Нержавеющая сталь 316 | 3/4 дюйма | Наруж. резьба NPT | 3/4 дюйма | Наруж. резьба NPT | Afficher le produit |
| SS-12-HN-12RS | Нержавеющая сталь 316 | 3/4 дюйма | Наруж. резьба NPT | 3/4 дюйма | Наружная цилиндрическая резьба ISO, прямой буртик | Afficher le produit |
| SS-12-HN-12RT | Нержавеющая сталь 316 | 3/4 дюйма | Наруж. резьба NPT | 3/4 дюйма | Наруж. коническая резьба ISO | Afficher le produit |
| SS-16-HN | Нержавеющая сталь 316 | 1 дюйм | Наруж. резьба NPT | 1 дюйм | Наруж. резьба NPT | Afficher le produit |
| SS-16-HN-16RS | Нержавеющая сталь 316 | 1 дюйм | Наруж. резьба NPT | 1 дюйм | Наружная цилиндрическая резьба ISO, прямой буртик | Afficher le produit |
| SS-16-HN-16RT | Нержавеющая сталь 316 | 1 дюйм | Наруж. резьба NPT | 1 дюйм | Наруж. коническая резьба ISO | Afficher le produit |
| SS-24-HN | Нержавеющая сталь 316 | 1 1/2 дюйма | Наруж. резьба NPT | 1 1/2 дюйма | Наруж. резьба NPT | Afficher le produit |
| SS-2-HN | Нержавеющая сталь 316 | 1/8 дюйма | Наруж. резьба NPT | 1/8 дюйма | Наруж. резьба NPT | Afficher le produit |
| SS-2-HN-2RS | Нержавеющая сталь 316 | 1/8 дюйма | Наруж. резьба NPT | 1/8 дюйма | Наружная цилиндрическая резьба ISO, прямой буртик | Afficher le produit |
| SS-2-HN-2RT | Нержавеющая сталь 316 | 1/8 дюйма | Наруж. резьба NPT | 1/8 дюйма | Наруж. коническая резьба ISO | Afficher le produit |
| SS-4-HN | Нержавеющая сталь 316 | 1/4 дюйма | Наруж. резьба NPT | 1/4 дюйма | Наруж. резьба NPT | Afficher le produit |
| SS-4-HN-4RS | Нержавеющая сталь 316 | 1/4 дюйма | Наруж. резьба NPT | 1/4 дюйма | Наружная цилиндрическая резьба ISO, прямой буртик | Afficher le produit |
| SS-4-HN-4RT | Нержавеющая сталь 316 | 1/4 дюйма | Наруж. резьба NPT | 1/4 дюйма | Наруж. коническая резьба ISO | Afficher le produit |
| SS-4-HN-RT | Нержавеющая сталь 316 | 1/4 дюйма | Наруж. коническая резьба ISO | 1/4 дюйма | Наруж. коническая резьба ISO | Afficher le produit |
| SS-600-2-16 | Нержавеющая сталь 316 | 3/8 дюйма | Трубный обжимной фитинг Swagelok® | 1 дюйм | Наруж. резьба NPT | Afficher le produit |
| SS-6-HN | Нержавеющая сталь 316 | 3/8 дюйма | Наруж. резьба NPT | 3/8 дюйма | Наруж. резьба NPT | Afficher le produit |
| SS-6-HN-6RS | Нержавеющая сталь 316 | 3/8 дюйма | Наруж. резьба NPT | 3/8 дюйма | Наружная цилиндрическая резьба ISO, прямой буртик | Afficher le produit |
| SS-6-HN-6RT | Нержавеющая сталь 316 | 3/8 дюйма | Наруж. резьба NPT | 3/8 дюйма | Наруж. коническая резьба ISO | Afficher le produit |
| SS-6-HN-RT | Нержавеющая сталь 316 | 3/8 дюйма | Наруж. коническая резьба ISO | 3/8 дюйма | Наруж. коническая резьба ISO | Afficher le produit |
| SS-8-HN | Нержавеющая сталь 316 | 1/2 дюйма | Наруж. резьба NPT | 1/2 дюйма | Наруж. резьба NPT | Afficher le produit |
| SS-8-HN-10K | Edelstahl 316 | 1/2 Zoll | Dickwandiges NPT-Außengewinde | 1/2 Zoll | Dickwandiges NPT-Außengewinde | Afficher le produit |
| SS-8-HN-8RS | Edelstahl 316 | 1/2 Zoll | NPT Außengewinde | 1/2 Zoll | Zylindrisches ISO-Außengewinde, gerade Abdichtfläche | Afficher le produit |
| SS-8-HN-8RT | Edelstahl 316 | 1/2 Zoll | NPT Außengewinde | 1/2 Zoll | Kegeliges ISO-Außengewinde | Afficher le produit |
| SS-8-HN-RT | Edelstahl 316 | 1/2 Zoll | Kegeliges ISO-Außengewinde | 1/2 Zoll | Kegeliges ISO-Außengewinde | Afficher le produit |
Contact
If you have questions about this product, please contact your local authorized sales and service center. They can also tell you about supporting services to help you get the most out of your investment.
