스테인리스강 1/4회전 계장용 플러그 밸브, 1/8인치 FNPT, 1.2Cv

Presiones de servicio hasta 206 bar (3000 psig); Conexiones finales mediante racores Swagelok® y roscas cónicas NPT e ISO; Tamaños desde 6 a 12 mm y desde 1/8 a 1/2 pulgada; Materiales de latón y acero inoxidable 316

Características: Procedimiento de identificación paso a paso de roscas y conexiones finales.

Features: Limits access to manually actuated valves;Lockout accessory enables compliance with OSHA Lockout/Tagout, Standard 29 CFR Part 1910.147, Control of Hazardous Energy Bright safety orange color promotes high visibility. Other colors are available.

Swagelok® Specification SC-10 defines the cleaning, lubrication, assembly, and packaging requirements for standard Swagelok products and describes practices used to meet these requirements.

Valve sizing often is described by the nominal size of the end connections, but a more important measure is the flow that the valve can provide. And determining flow through a valve can be simple.

Pages 1-3. Features: installation in high-pressure applications and high safety-factor systems.

选择合适的模板（P4T或者P6T）用模板为安装支架孔和中心孔的位置做记号。钻孔，直径和暗钉孔深度要求如模板所示。; 用安装支架包住阀体，然后将阀体的上部从板的后面穿过中心孔。; 用5/8 in. 的长 螺丝将安装支架联到板上。确保阀体的朝向符合要求，然后用3/32 in. 六角扳手拧螺丝直至拧紧。; 将指示标牌附在板前面，使单词OPEN位于阀体出口侧的上方。; 将手柄置于手柄联结器上，对准“平坦面”。用1/2 in.的长螺丝将手柄固定到联结器上。用3/32 in.六角扳手小心地拧紧螺丝直至手柄牢固。; 对准手柄盖和手柄，然后“咔”的一声将手柄盖扣在手柄上面。7. 测试阀门以确保能正常工作

安装尺寸大于1in.或者25mm的世伟洛克卡套管接头时请遵循本规范。