システム設計者およびユーザーは、製品カタログの内容をすべてご覧になった上で、安全な製品の選定を行ってください。 安全にトラブルなく機能するよう、システム全体の設計を考慮して、製品をご選定ください。 機能、材質の適合性、数値データなどを考慮し製品を選定すること、また、適切な取り付け、操作およびメンテナンスを行うのは、システム設計者およびユーザーの責任ですので、十分にご注意ください。
Attention: Les composants qui ne sont pas régis par une norme, comme les raccords pour tubes Swagelok, ne doivent jamais être mélangés/intervertis avec ceux d’autres fabricants.
Vanne à soufflet haute pureté en acier inoxydable 316L, raccord pour tube Swagelok 3/8 po, actionneur NF, entrée avec filetage NPT 1/8-27
Ouvrir une session ou s’inscrire pour afficher des prix
Catalogues
Passage droit
Isolez les fluides dans des systèmes fiables et étanches, avec les vannes à soufflet Swagelok avec joint soudé et sans garniture. Les vannes à soufflet sont idéales pour les applications dans lesquelles l'étanchéité par rapport à l'atmosphère est primordiale. Swagelok propose plusieurs options pour des applications d'usage général et pour des applications haute pureté.
Packungslose Ventile mit ganzmetallischer Abdichtung zur Atmosphäre; Druckraten bis 34,4 bar (500 psig); Temperaturbereich bis 93°C (200°F); Endanschlüsse 6 bis 12 mm und 1/4 bis 1/2 Zoll
Gewinde und EndanschlüsseIdentifikationshilfe
In diesem Dokument sind die von Swagelok angewendeten Richtlinien für die Herstellung von Edelstahlprodukten, für Photovoltaik- (PV) Anwendungen vorgesehen sind, festgelegt. Dieses Dokument muss zusammen mit Produktkatalogen, technischen Merkblättern und Berichten für vollständige Produktinformationen verwendet werden. Die Anwendung dieses Dokuments ist auf medienberührte Systemkomponenten begrenzt.
Pages 1-3. Features: installation in high-pressure applications and high safety-factor systems.
Schweißarbeiten müssen von qualifiziertem Personal, wie in Abschnitt IX der ASME-Kesselnorm beschrieben, durchgeführt werden.
Procedure for installing Swagelok tube fittings in sizes over 1 inch or 25 mm.
Dieses Dokuments enthält die von Swagelok® Company und seinen Zulieferern verwendeten Richtlinien zum Einhaltung der Produktreinheitsanforderungen nach ASTM G93 Stufe C.Die Anwendung des Dokuments ist auf medienberührte Systemkomponenten begrenzt.Dieses Dokument muss zusammen mit Produktkatalogen, technischen Merkblättern und Berichten verwendet werden.
Features: Limits access to manually actuated valves;Lockout accessory enables compliance with OSHA Lockout/Tagout, Standard 29 CFR Part 1910.147, Control of Hazardous Energy Bright safety orange color promotes high visibility. Other colors are available.
Bellows Kits, Stem Tip/Adapter Kits, bellows/Stem/Stem Tip/Adapter Kits, Gasket Kits for Swagelok® bellows-sealed valves
Features: This technical report provides data on Swagelok® BN series bellows valves. The report covers: P surface finish specifications; static particle counting; moisture analysis; hydrocarbon analysis; ionic cleanliness; lab cycle test data.
Dieses Dokument beschreibt die von Swagelok® verwendeten Richtlinien für die Herstellung ultrahochreiner (UHP) elektropolierter Edelstahlprodukte sowie ultrahochreiner Kunststoffprodukte festgelegt. Dieses Dokument muss zusammen mit Produktkatalogen, technischen Merkblättern und Berichten für vollständige Produktinformationen verwendet werden.
Valve sizing often is described by the nominal size of the end connections, but a more important measure is the flow that the valve can provide. And determining flow through a valve can be simple.
Spécifications
Attribut | Valeur |
---|---|
Matériau du corps | Acier inoxydable 316L |
Procédé de nettoyage | Nettoyage et conditionnement spéciaux (SC-11) |
Dimension du raccordement 1 | 3/8 po |
Type du raccordement 1 | Raccord Swagelok® pour tubes |
Dimension du raccordement 2 | 3/8 po |
Cv maximal | 0.7 |
Température maximale, °F (°C) | 200 (93) |
Température minimale, °F (°C) | -40 (-40) |
eClass (4.1) | 37010201 |
eClass (5.1.4) | 37010201 |
eClass (6.0) | 37010201 |
eClass (6.1) | 37010201 |
UNSPSC (4.03) | 40141600 |
UNSPSC (10.0) | 40141609 |
UNSPSC (11.0501) | 40141609 |
UNSPSC (13.0601) | 40141609 |
UNSPSC (15.1) | 40141609 |
UNSPSC (17.1001) | 40141600 |
Ressources
Produits similaires
Réf. pièce
|
Matériau du corps
|
Dimension du raccordement 1
|
Type du raccordement 1
|
Dimension du raccordement 2
|
Type du raccordement 2
|
|
---|---|---|---|---|---|---|
6LV-BNBW4-C | Acero inox. 316L VAR | 1/4 pulg. | Soldadura de tubo a tope | 1/4 pulg. | Soldadura de tubo a tope | Afficher le produit |
SS-BN8FR8 | Acero inoxidable 316L | 1/2 pulg. | Cierre Frontal (Junta Plana) VCR hembra | 1/2 pulg. | Cierre Frontal (Junta Plana) VCR hembra | Afficher le produit |
SS-BN8FR8-2C | Acero inoxidable 316L | 1/2 pulg. | Cierre Frontal (Junta Plana) VCR hembra | 1/2 pulg. | Cierre Frontal (Junta Plana) VCR hembra | Afficher le produit |
SS-BN8FR8-C | Acero inoxidable 316L | 1/2 pulg. | Cierre Frontal (Junta Plana) VCR hembra | 1/2 pulg. | Cierre Frontal (Junta Plana) VCR hembra | Afficher le produit |
SS-BN8FR8-DU-O | Acier inoxydable 316L | 1/2 po | VCR femelle (joint métallique) | 1/2 po | VCR femelle (joint métallique) | Afficher le produit |
SS-BN8S8-C | Acier inoxydable 316L | 1/2 po | Raccord Swagelok® pour tubes | 1/2 po | - | Afficher le produit |
SS-BN8VCR8 | Acier inoxydable 316L | 1/2 po | Raccord à étanchéité de surface (joint métallique) VCR mâle | 1/2 po | Raccord à étanchéité de surface (joint métallique) VCR mâle | Afficher le produit |
SS-BN8VCR8-2C | Acier inoxydable 316L | 1/2 po | Raccord à étanchéité de surface (joint métallique) VCR mâle | 1/2 po | Raccord à étanchéité de surface (joint métallique) VCR mâle | Afficher le produit |
SS-BN8VCR8-C | Acier inoxydable 316L | 1/2 po | Raccord à étanchéité de surface (joint métallique) VCR mâle | 1/2 po | Raccord à étanchéité de surface (joint métallique) VCR mâle | Afficher le produit |
SS-BN8VCR8-P | Acier inoxydable 316L | 1/2 po | Raccord VCR mâle (joint métallique) | 1/2 po | Raccord VCR mâle (joint métallique) | Afficher le produit |
SS-BNS4 | Acier inoxydable 316L | 1/4 po | Raccord Swagelok® pour tubes | 1/4 po | Raccord Swagelok® pour tubes | Afficher le produit |
SS-BNS4-2C | Acier inoxydable 316L | 1/4 po | Raccord Swagelok® pour tubes | 1/4 po | Raccord Swagelok® pour tubes | Afficher le produit |
SS-BNS4-2O | Acier inoxydable 316L | 1/4 po | Raccord Swagelok® pour tubes | 1/4 po | Raccord Swagelok® pour tubes | Afficher le produit |
SS-BNS4-C | Acier inoxydable 316L | 1/4 po | Raccord Swagelok® pour tubes | 1/4 po | Raccord Swagelok® pour tubes | Afficher le produit |
SS-BNS6-C | Acier inoxydable 316L | 3/8 po | Raccord Swagelok® pour tubes | 3/8 po | Raccord Swagelok® pour tubes | Afficher le produit |
SS-BNV51 | Acier inoxydable 316L | 1/4 po | VCR femelle (joint métallique) | 1/4 po | VCR femelle (joint métallique) | Afficher le produit |
SS-BNV51-2C | Acier inoxydable 316L | 1/4 po | VCR femelle (joint métallique) | 1/4 po | VCR femelle (joint métallique) | Afficher le produit |
SS-BNV51-C | Acier inoxydable 316L | 1/4 po | VCR femelle (joint métallique) | 1/4 po | VCR femelle (joint métallique) | Afficher le produit |
SS-BNV51-DU-C | Acier inoxydable 316L | 1/4 po | VCR femelle (joint métallique) | 1/4 po | VCR femelle (joint métallique) | Afficher le produit |
SS-BNV51-O | Acier inoxydable 316L | 1/4 po | Raccord VCR femelle (joint métallique) | 1/4 po | Raccord VCR femelle (joint métallique) | Afficher le produit |
SS-BNVCR4 | Acier inoxydable 316L | 1/4 po | Raccord à étanchéité de surface (joint métallique) VCR mâle | 1/4 po | Raccord à étanchéité de surface (joint métallique) VCR mâle | Afficher le produit |
SS-BNVCR4-2C | Acier inoxydable 316L | 1/4 po | Raccord à étanchéité de surface (joint métallique) VCR mâle | 1/4 po | Raccord à étanchéité de surface (joint métallique) VCR mâle | Afficher le produit |
SS-BNVCR4-C | 316Lステンレス鋼 | 1/4 インチ | 面シール(メタル・ガスケット式)おすVCR | 1/4 インチ | 面シール(メタル・ガスケット式)おすVCR | Afficher le produit |
SS-BNVVCR4-C | 316Lステンレス鋼 | 1/4 インチ | 面シール(メタル・ガスケット式)おすVCR | 1/4 インチ | 面シール(メタル・ガスケット式)おすVCR | Afficher le produit |
お問い合わせ
本製品に関するご質問は、担当のスウェージロック指定販売会社までお問い合わせください。指定販売会社は、投資を最大限に活用するためのアドバイスも提供いたします。