ステンレス鋼製3ピース型60シリーズ・ボール・バルブ、強化PTFE製シート、3/8 インチ・サイズNPTめねじ

■ エンド・コネクション・サイズ：1/8 インチから2 インチまで、6 mmから25 mmまで／■ 材質：ステンレス鋼、炭素鋼、真ちゅう、特殊合金／■ 開閉用（2方タイプ）、切り替え用（3方タイプ）／■ 自己補正式シート構造／■ 2ピース構成のライブ・ロード式ステム・パッキン

■ 最高使用温度：204℃／■ 最高使用圧力：15.1 MPa／■ 材質：ステンレス鋼、炭素鋼／■ API Standard 607（第6版）およびSwagelok 火災テストSEI-00334仕様に適合／■ 63／65／67／68シリーズにて、 ご注文いただけます

キット内容： ラッチロック・ハンドル／スペーサー（67シリーズを除く）／ステム・スプリング／ロック・プレート／手順説明書／ボディ・ボルト（2個、スタッドではなくボルトで組み立てられた4本ボルト構造バルブ用）

Features: Swagelok® electric actuators can be used to control the position of many Swagelok ball valves; alternating- and direct-current models are available. An electrical signal is used to change valve position from remote locations. Integral limit switches provide an output signal of the valve position, even between positions.

■ ラック・アンド・ピニオン式エアー・アクチュエーター、ソレノイド・バルブ、リミット・スイッチ／■ ISO 5211準拠のエアー・アクチュエーター、ソレノイド・バルブ、リミット・スイッチ、ポジション・センサー／■ アクチュエーター付きボール・バルブ・アセンブリーまたは単品（キット）

酸素を安全に取り扱うために取り組まなければならない特有の問題についての概要を記載しています。

Mounting Bracket Kit Contents; Actuator Kit Contents; Tools Required; Actuator Preparation; Valve Preparation; Mounting Instructions.

S60P steam series ball valve maintenance instructions

Valves may be welded into system WITHOUT disassembly; Valve disassembly will damage flange seals and require their replacement; Additional seal kits are available for routine maintenance.

Features: 40G, 40, 60, 83, H83, SK, and FKB Series Valves, AFS Ball Valves; Calculate valve operating torque; Choose actuators and related components; Select mounting bracket kits

Electric Actuator Installation

Open the valve; Remove the body fastener from the “C” location on the swing-away side of the valve; Loosen the remaining body fasteners.

범위 이 문서에서는 Swagelok및 관련 공급자가 ASTM G93 레벨 C에 언급된 제품 청정도 요건을 준수하기 위해 사용하는 가이드라인을 설명합니다. 이 문서는 유체가 접촉되는 시스템 부품에만 한정적으로 적용됩니다. 이 문서는 제품 카탈로그, 기술 보고서 및 기타 보고서들과 함께 이용해야 합니다.

Using a box wrench, remove the stem nut, stem springs, stop plate and lever handle; 63 series only: Place extended handle positioner plate on stem.

To ensure proper valve function, valve must be installed with flow in the direction indicated by the arrow on the valve body.

Caution: Pneumatic actuator operation is sensitive to valve packing nut adjustment.

Abstract of Cleaning Procedure For Chlorine Series Valves.

Kit contents: Standard Fastener (bolt or stud 3), Instruction sheet, Black Fastener (bolt or stud), Stem nuts (2), Body nuts (8), Lubricants (1), Material Safety Data Sheets (1)

Warning: Before servicing any installed valve, you must depressurize the system cycle valve Mounting Namur Style Bracket to 2-way 60 series ball valve.

60 Series Ball Valves, 4-Bolt, No Lube Instructions

This document specifies guidelines used by Swagelok Company for producing stainless steel products intended for photovoltaic (PV) applications.

This ball replacement kit must be used with the proper 60 series seal maintenance kit.

This stem replacement kit must be used with the proper60 series seal maintenance kit.

60 and 60X Series 4-Bolt Ball Valves Maintenance Instructions

60 Series Flange Seal Installation