Vanne à poignée articulée en acier inoxydable, raccord pour tube Swagelok 1/4 po, actionneur haute température normalement fermé
型番: SS-92S4-C-HT
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
仕様
ストレート型、アクチュエーター付き迅速かつ容易な開閉操作が可能です。 ログインまたは登録して価格を見る お問い合わせ本製品に関するご質問は、担当のスウェージロック指定販売会社までお問い合わせください。指定販売会社は、投資を最大限に活用するためのアドバイスも提供いたします。
安全な製品の選定について:
システム設計者およびユーザーは、製品カタログの内容をすべてご覧になった上で、安全な製品の選定を行ってください。 安全にトラブルなく機能するよう、システム全体の設計を考慮して、製品をご選定ください。 機能、材質の適合性、数値データなどを考慮し製品を選定すること、また、適切な取り付け、操作およびメンテナンスを行うのは、システム設計者およびユーザーの責任ですので、十分にご注意ください。 警告: Les composants qui ne sont pas régis par une norme, comme les raccords pour tubes Swagelok, ne doivent jamais être mélangés/intervertis avec ceux d’autres fabricants. |
システム設計者およびユーザーは、製品カタログの内容をすべてご覧になった上で、安全な製品の選定を行ってください。 安全にトラブルなく機能するよう、システム全体の設計を考慮して、製品をご選定ください。 機能、材質の適合性、数値データなどを考慮し製品を選定すること、また、適切な取り付け、操作およびメンテナンスを行うのは、システム設計者およびユーザーの責任ですので、十分にご注意ください。
警告: Les composants qui ne sont pas régis par une norme, comme les raccords pour tubes Swagelok, ne doivent jamais être mélangés/intervertis avec ceux d’autres fabricants.
カタログ
ストレート型、アクチュエーター付き
迅速かつ容易な開閉操作が可能です。
Modèles à actionnement manuel et pneumatique, Configuration de corps droite, en angle et en croix, Matériaux en acier inoxydable 316 et laiton
Swagelok® Specification SC-10 defines the cleaning, lubrication, assembly, and packaging requirements for standard Swagelok products and describes practices used to meet these requirements.
This document specifies guidelines used by Swagelok® Company and its suppliers to ensure compliance with product cleanliness requirements as stated in ASTM G93 Level C. Application of the document is limited to wetted system components. This document must be used in conjunction with product catalogs, technical bulletins, and reports.
Valve sizing often is described by the nominal size of the end connections, but a more important measure is the flow that the valve can provide. And determining flow through a valve can be simple.
Pages 1-3. Features: installation in high-pressure applications and high safety-factor systems.
Caractéristiques : Procédure d’identification étape par étape des filetages et raccords.
仕様
SS-92S4-C-HT — Vanne à poignée articulée en acier inoxydable, raccord pour tube Swagelok 1/4 po, actionneur haute température normalement fermé
属性 | 値 |
---|---|
アクチュエーター型式 | Série 92 |
アクチュエーター・タイプ | Pneumatique |
ボディ材質 | Acier inoxydable 316 |
洗浄プロセス | Nettoyage et conditionnement standard (SC-10) |
コネクション1 サイズ | 1/4 po |
コネクション1 タイプ | Raccord pour tube Swagelok® |
コネクション2 サイズ | 1/4 po |
コネクション2 タイプ | Raccord pour tube Swagelok® |
最大Cv | 0.2 |
フロー・パターン | Droite (2 voies) |
最高温度、°F (°C) | 400 (204) |
最高使用温度における最高使用圧力 | 400°F À 300 PSIG / 204°C À 20,6 BAR |
最低温度、 °F (°C) | -20 (-28) |
オリフィス | 0,125 po / 3,2 mm |
室温における最高使用圧力 | 300 PSIG À 100°F / 20,6 BAR À 37°C |
ステム・チップ材質 | PTFE |
ステム・タイプ | Siège doux PTFE |
eClass (4.1) | 37011001 |
eClass (5.1.4) | 37010201 |
eClass (6.0) | 37010203 |
eClass (6.1) | 37010203 |
eClass (10.1) | 37010203 |
UNSPSC (4.03) | 40141602 |
UNSPSC (10.0) | 40141638 |
UNSPSC (11.0501) | 40141638 |
UNSPSC (13.0601) | 40141638 |
UNSPSC (15.1) | 40141638 |
UNSPSC (17.1001) | 40141638 |
資料
類似製品
型番
|
ボディ材質
|
コネクション1 サイズ
|
コネクション1 タイプ
|
コネクション2 サイズ
|
コネクション2 タイプ
|
|
---|---|---|---|---|---|---|
B-92F2-C | Laiton | 1/8 po | Filetage NPT femelle | 1/8 po | Filetage NPT femelle | 製品を見る |
SS-92F2-C | Acier inoxydable 316 | 1/8 po | Filetage NPT femelle | 1/8 po | Filetage NPT femelle | 製品を見る |
SS-92S2-C | Acier inoxydable 316 | 1/8 po | Raccord Swagelok® pour tubes | 1/8 po | Raccord Swagelok® pour tubes | 製品を見る |
SS-92S4-C | Acier inoxydable 316 | 1/4 po | Raccord Swagelok® pour tubes | 1/4 po | Raccord Swagelok® pour tubes | 製品を見る |
SS-92S4-O | Acier inoxydable 316 | 1/4 po | Raccord Swagelok® pour tubes | 1/4 po | Raccord Swagelok® pour tubes | 製品を見る |
SS-92S4-O-HT | Acier inoxydable 316 | 1/4 po | Raccord pour tube Swagelok® | 1/4 po | Raccord pour tube Swagelok® | 製品を見る |
SS-92S6MM-C | Acier inoxydable 316 | 6 mm | Raccord Swagelok® pour tubes | 6 mm | Raccord Swagelok® pour tubes | 製品を見る |
お問い合わせ
本製品に関するご質問は、担当のスウェージロック指定販売会社までお問い合わせください。指定販売会社は、投資を最大限に活用するためのアドバイスも提供いたします。