|
스테인리스강 및 황동 12UG 시리즈 벨로우즈 밸브용 스템 팁/어댑터 키트
Part #: SS-12U-ST-K5
|
||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Specifications
Stem Tip KitSelect from a variety of spare parts and accessories for your Swagelok valve. Log in or Register to view price お問い合わせ本製品に関するご質問は、担当のスウェージロック指定販売会社までお問い合わせください。指定販売会社は、投資を最大限に活用するためのアドバイスも提供いたします。
安全な製品の選定について：
システム設計者およびユーザーは、製品カタログの内容をすべてご覧になった上で、安全な製品の選定を行ってください。 安全にトラブルなく機能するよう、システム全体の設計を考慮して、製品をご選定ください。 機能、材質の適合性、数値データなどを考慮し製品を選定すること、また、適切な取り付け、操作およびメンテナンスを行うのは、システム設計者およびユーザーの責任ですので、十分にご注意ください。 Warning: Do not mix/interchange Swagelok products or components not governed by industrial design standards, including Swagelok tube fitting end connections, with those of other manufacturers. 
|
システム設計者およびユーザーは、製品カタログの内容をすべてご覧になった上で、安全な製品の選定を行ってください。 安全にトラブルなく機能するよう、システム全体の設計を考慮して、製品をご選定ください。 機能、材質の適合性、数値データなどを考慮し製品を選定すること、また、適切な取り付け、操作およびメンテナンスを行うのは、システム設計者およびユーザーの責任ですので、十分にご注意ください。
Warning: Do not mix/interchange Swagelok products or components not governed by industrial design standards, including Swagelok tube fitting end connections, with those of other manufacturers.
스테인리스강 및 황동 12UG 시리즈 벨로우즈 밸브용 스템 팁/어댑터 키트
Log in or Register to view price
Catalogs
Stem Tip Kit
Système de confinement secondaire au-dessus des soufflets, Pressions de service jusqu’à 172 bar (2500 psig), Températures jusqu’à 648°C (1200°F), Raccordements d’extrémité de 6, 10, et 12 mm ; 1/4, 3/8, 1/2, 3/4 et 1 po, Acier inoxydable
Caractéristiques : Procédure d’identification étape par étape des filetages et raccords.
This document specifies guidelines used by Swagelok® Company and its suppliers to ensure compliance with product cleanliness requirements as stated in ASTM G93 Level C. Application of the document is limited to wetted system components. This document must be used in conjunction with product catalogs, technical bulletins, and reports.
The Swagelok® 3-valve manifold uses bellows-sealed valves for systems with difficult fluid containment requirements. Features: 316 stainless steel bodies, Swagelok B or U series bellows valves for general or severe service, pipe fitting, flange, and Swagelok tube fitting end connections
Features: Limits access to manually actuated valves;Lockout accessory enables compliance with OSHA Lockout/Tagout, Standard 29 CFR Part 1910.147, Control of Hazardous Energy Bright safety orange color promotes high visibility. Other colors are available.
Bellows Kits, Stem Tip/Adapter Kits, bellows/Stem/Stem Tip/Adapter Kits, Gasket Kits for Swagelok® bellows-sealed valves
Swagelok® Specification SC-10 defines the cleaning, lubrication, assembly, and packaging requirements for standard Swagelok products and describes practices used to meet these requirements.
Valve sizing often is described by the nominal size of the end connections, but a more important measure is the flow that the valve can provide. And determining flow through a valve can be simple.
Pages 1-3. Features: installation in high-pressure applications and high safety-factor systems.
Le soudage doit être effectué par du personnel qualifié, comme spécifié à la Section IX du code des chaudières de l’ASME.
Procedure for installing Swagelok tube fittings in sizes over 1 inch or 25 mm.
Specifications
SS-12U-ST-K5 — 스테인리스강 및 황동 12UG 시리즈 벨로우즈 밸브용 스템 팁/어댑터 키트
| Attribute | Value |
|---|---|
| Cleaning Process | Standard Cleaning and Packaging (SC-11) |
| eClass (4.1) | 37010602 |
| eClass (5.1.4) | 37010201 |
| eClass (6.0) | 37019102 |
| eClass (6.1) | 37019102 |
| eClass (10.1) | 37019102 |
| UNSPSC (4.03) | 40141616 |
| UNSPSC (10.0) | 40141616 |
| UNSPSC (11.0501) | 40141616 |
| UNSPSC (13.0601) | 40141616 |
| UNSPSC (15.1) | 40141616 |
| UNSPSC (17.1001) | 40141616 |
Resources
Drawings
Two-dimensional renderings are available for this product. Download the CAD file.
Three-dimensional renderings are available for this product. Download the CAD file.
Sales drawings are available for this product. Download the files.
Similar Products
|
Part #
|
Body Material
|
Connection 1 Size
|
Connection 1 Type
|
Connection 2 Size
|
Connection 2 Type
|
|
|---|---|---|---|---|---|---|
| KF-BN4-K5 | PCTFE | - | - | - | - | View Product |
| SS-4BA-K5 | PCTFE | - | - | - | - | View Product |
| SS-4BK-K5 | Политрифторхлорэтилен (PCTFE) | - | - | - | - | View Product |
| SS-4B-VP-K5 | Полиамид | - | - | - | - | View Product |
| SS-8BA-K5 | Политрифторхлорэтилен (PCTFE) | - | - | - | - | View Product |
| SS-8BK-K5 | Политрифторхлорэтилен (PCTFE) | - | - | - | - | View Product |
| SS-8B-VP-K5 | Полиимид | - | - | - | - | View Product |
| SS-BN4-K1 | Политрифторхлорэтилен (PCTFE) | - | - | - | - | View Product |
| SS-BN8-K1 | Политрифторхлорэтилен (PCTFE) | - | - | - | - | View Product |
| SS-HB-KF-K5 | Политрифторхлорэтилен (PCTFE) | - | - | - | - | View Product |
| SS-HB-V-K5 | 폴리이미드 | - | - | - | - | View Product |
お問い合わせ
本製品に関するご質問は、担当のスウェージロック指定販売会社までお問い合わせください。指定販売会社は、投資を最大限に活用するためのアドバイスも提供いたします。